Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Heat Transfer Research
Impact-faktor: 0.404 5-jähriger Impact-Faktor: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Druckformat: 1064-2285
ISSN Online: 2162-6561

Volumes:
Volumen 51, 2020 Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2016008224
pages 575-595

NUMERICAL INVESTIGATION OF COMBINED PARALLEL TWO SHELL-PASS SHELL-AND-TUBE HEAT EXCHANGERS WITH CONTINUOUS HELICAL BAFFLES

Jian-Feng Yang
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China
Qiu-Wang Wang
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, P.R. China
Min Zeng
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China

ABSTRAKT

A combined parallel two shell-pass shell-and-tube heat exchanger with continuous helical baffles (CPTP-STHX) and an improved model (CPTP-STHX-improved) have been proposed to improve the heat transfer performance of shell-and-tube heat exchangers (STHXs). It is found that proportion of the mass flow rate of the inner shell pass to the total mass flow rate of the shell side is a constant. The heat transfer performance increases with the resistance of the inner shell pass. The CPTP-STHX-improved is compared with a conventional STHX with segmental baffles (SG-STHXs) by means of the computational fluid dynamic (CFD) method. The numerical results show that for the same mass flow rate m in the shell side, the heat transfer coefficient h, the overall pressure drop Δp, and the heat transfer coefficient per pressure drop h/Δp of the CPTP-STHX-improved are 41.1%, 34.5%, and 4.9% higher than those of the SG-STHX, respectively. For the same overall pressure drop in the shell side, the heat transfer coefficient of the CPTP-STHX-improved has 23.1% increases than that of the SG-STHX. Based on these results, it can be concluded that the CPTP-STHX-improved might be used to replace the conventional STHX with segmental baffles in industrial applications.


Articles with similar content:

EXPERIMENTAL AND NUMERICAL STUDIES ON SHELL-SIDE PERFORMANCE OF THREE DIFFERENT SHELL-AND-TUBE HEAT EXCHANGERS WITH HELICAL BAFFLES
Journal of Enhanced Heat Transfer, Vol.18, 2011, issue 5
Gui-Dong Chen, Qiu-Wang Wang, Min Zeng
NUMERICAL STUDY OF THE SHELL−SIDE PERFORMANCE OF THE TRISECTION BAFFLED AND QUARTERN BAFFLED HEAT EXCHANGERS
Heat Transfer Research, Vol.45, 2014, issue 8
Luhong Zhang, Xiaoming Xiao, Yongli Sun, Feiyang Li, Bin Jiang
STUDY ON PERFORMANCES OF SHELLSIDE OF THE BLADE BAFFLE HEAT EXCHANGER WITH DIFFERENT ARRANGEMENT OF BAFFLE
International Heat Transfer Conference 16, Vol.13, 2018, issue
Zunchao Liu, Shupei Zhao, Yongqing Wang, Guofeng Tan, Dan Wang, Ke Wang
PERFORMANCE ENHANCEMENT OF TUBULAR AIR PRE-HEATER WITH DIFFERENT TUBE DIAMETERS AND PROFILES
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Niraj Kumar Mishra, Anshul Sharma, Adgale Tushar Balkrishna
NUMERICAL STUDY OF HEAT TRANSFER IN GRAVITY-DRIVEN PARTICLE FLOW NEARBY TUBE OUT-WALL SURFACE
International Heat Transfer Conference 16, Vol.18, 2018, issue
Yingxue Hu , Xing Tian , Qiu-Wang Wang, Jian Yang, Zhigang Guo