Abo Bibliothek: Guest

BOILING HEAT TRANSFER OF COPPER FOAM UNDER DIFFERENT PRESSURE LEVELS

Volumen 22, Ausgabe 10, 2019, pp. 1321-1331
DOI: 10.1615/JPorMedia.2019025548
Get accessGet access

ABSTRAKT

In this study, copper foam prepared by electroplating sintering was used as boiling heat transfer wall and deionized water as working substance to investigate the boiling heat transfer performance of copper foam with different structural parameters under different pressure levels. Experimental results show that the boiling heat transfer capacity of copper foam first decreases and then increases with increasing thickness. Meanwhile, the boiling heat transfer capacity of copper foam increases first and then decreases with increasing pore density. The pressure for boiling heat transfer performance of copper foam did not change significantly with increasing copper foam thickness. However, the boiling heat transfer performance of copper foam decreases with increasing pressure and pore density.

REFERENZEN
  1. Bai, L.Z. and Zhang, L.P., Evaporation/Boiling Heat Transfer Characteristics in an Artery Porous Structure, Appl. Therm. Eng., vol. 104, pp. 587-595,2016.

  2. Cohen, A.B. and Neil, A.M., Parametric Effect of Pool Boiling Critical Heat Flux in Dielectric Liquid, in Pool and External Flow Boiling,pp. 171-175, New York: ASME, 1992.

  3. Deng, D.X. and Feng, J.Y., Pool Boiling Heat Transfer of Porous Structures with Reentrant Cavities, Int. J. Heat Mass Transf, vol. 99, pp. 555-558, 2015.

  4. Ji, X.B. and Xu, J.L., Pool Boiling Heat Transfer on Uniform and Non-Uniform Porous Coating Surfaces, Exp. Therm. Fluid Sci., vol. 48, pp. 198-212,2013.

  5. Kim, D.E. and Yu, D.I., Review of Boiling Heat Transfer Enhancement on Micro Nanostructured Surfaces, Exp. Therm. Fluid Sci., vol. 66, pp. 173-196,2015.

  6. Mao, Y.B. and Chen, W., Study on Boiling Heat Transfer Characteristics of Open Cell, Refrig. Technol., vol. 43, pp. 79-83, 2015.

  7. Patil, C.M. and Kandlikar, S.G., Review of the Manufacturing Techniques for Porous Surfaces Used in Enhanced Pool Boiling, Heat Transf. Eng., vol. 35, pp. 887-902, 2014.

  8. Sheikhbahai, M. and Esfahany, N., Experimental Investigation of Pool Boiling of Fe3O4/Ethylene Glycolewater Nanofluid in Electric Field, Int. J. Therm. Sci, vol. 62, pp. 149-153,2012.

  9. Saylor, J.R. and Simon, T.W., The Effect of a Dimensionless Length Scale on the Critical Heat Flux in Saturated, Pool Boiling, in 1989 Nation Heat Transfer Conf, R.K. Shah, Ed., Heat Transfer Equipment Fundamentals, Design, Applications and Operating Problems, New York: ASME Heat Transfer Division, vol. 108, pp. 71-80, 1989.

  10. White, S.B. and Albert, J.S., Boiling Surface Enhancement by Electrophoretic Deposition of Particles from a Nanofluid, Int. J. Heat Mass Transf., vol. 54, pp. 4370-4375,2011.

  11. Wu, W. and Bostanci, H., Nucleate Boiling Heat Transfer Enhancement for Water and FC-72 on Titanium Oxide and Silicon Oxide Surfaces, Heat Mass Transf., vol. 53, pp. 1773-1777, 2010.

  12. Xu, P.F., Li, Q., and Xuan, Y., Enhanced Boiling Heat Transfer on Composite Porous Surface, Int. J. Heat Mass Transf., vol. 80, pp. 107-114,2015.

  13. Xu, Z.G., Qu, Z.G., and Tao, W.Q., Experimental Study on Pool Boiling of Porous Metal Foams, J. Eng. Therm. Phys., vol. 30, pp. 1713-1715,2009.

  14. Xu, Z.G., Qu, Z.G., and Zhao, C.Y., Experimental Correlation for Pool Boiling Heat Transfer on Metallic Foam Surface and Bubble Cluster Growth Behavior on Grooved Array Foam Surface, Int. J. Heat Mass Transf., vol. 77, pp. 1159-1182, 2014.

  15. Xu, Z.G. and Zhao, C.Y., Pool Boiling Heat Transfer of Open-Celled Metal Foams with V-Shaped Grooves for High Pore Densities, Exp. Therm. Fluid Sci, vol. 52, pp. 128-138,2014.

  16. Xu, Z.G. and Zhao, C.Y., Enhanced Boiling Heat Transfer by Gradient Porous Metals in Saturated Pure Water and Surfactant Solutions, Appl. Therm. Eng., vol. 100, pp. 58-77, 2015.

  17. Yang, Y.P. and Ji, X.B., Pool Boiling Heat Transfer on Copper Foam Covers with Water as Working Fluid, Int. J. Therm. Sci., vol. 49, pp. 1227-1237,2010.

  18. Zhao, Z.W. and Xue, Q., Comparison of Boiling Heat Transfer Characteristics of Sintered Multiscale Surface and Smooth Surface Pool, J. Eng. Therm. Phys, vol. 34, pp. 580-583,2013.

  19. Zhong, D.W. and Meng, J., Experimental Study of Saturated Pool Boiling from Downward Facing Structured Surfaces, Int. J. Therm. Sci., vol. 108, pp. 52-61, 2016.

  20. Zhu, Y., Hu, H.T., Ding, G., Peng, H., Huang, X., Zhuang, D., and Yu, J., Influence of Oil on Nucleate Pool Boiling Heat Transfer of Refrigerant on Metal Foam Covers, Int. J. Refrig., vol. 34, no. 2, pp. 509-517, 2011.

  21. Zuber, Z., Hydrodynamic Aspects of Boiling Heat Transfer, Physics and Mathematics, U.S. Atomic Energy Commission, Washington, DC, Tech. Rep. AECU-4439, 1959.

Zukünftige Artikel

Effects of Momentum Slip and Convective Boundary Condition on a Forced Convection in a Channel Filled with Bidisperse Porous Medium (BDPM) Vanengmawia PC, Surender Ontela ON THERMAL CONVECTION IN ROTATING CASSON NANOFLUID PERMEATED WITH SUSPENDED PARTICLES IN A DARCY-BRINKMAN POROUS MEDIUM Pushap Sharma, Deepak Bains, G. C. Rana Effect of Microstructures on Mass Transfer inside a Hierarchically-structured Porous Catalyst Masood Moghaddam, Abbas Abbassi, Jafar Ghazanfarian Insight into the impact of melting heat transfer and MHD on stagnation point flow of tangent hyperbolic fluid over a porous rotating disk Priya Bartwal, Himanshu Upreti, Alok Kumar Pandey Numerical Simulation of 3D Darcy-Forchheimer Hybrid Nanofluid Flow with Heat Source/Sink and Partial Slip Effect across a Spinning Disc Bilal Ali, Sidra Jubair, Md Irfanul Haque Siddiqui Fractal model of solid-liquid two-phase thermal transport characteristics in the rough fracture network shanshan yang, Qiong Sheng, Mingqing Zou, Mengying Wang, Ruike Cui, Shuaiyin Chen, Qian Zheng Application of Artificial Neural Network for Modeling of Motile Microorganism-Enhanced MHD Tangent Hyperbolic Nanofluid across a vertical Slender Stretching Surface Bilal Ali, Shengjun Liu, Hongjuan Liu Estimating the Spreading Rates of Hazardous Materials on Unmodified Cellulose Filter Paper: Implications on Risk Assessment of Transporting Hazardous Materials Heshani Manaweera Wickramage, Pan Lu, Peter Oduor, Jianbang Du ELASTIC INTERACTIONS BETWEEN EQUILIBRIUM PORES/HOLES IN POROUS MEDIA UNDER REMOTE STRESS Kostas Davanas Gravity modulation and its impact on weakly nonlinear bio-thermal convection in a porous layer under rotation: a Ginzburg-Landau model approach Michael Kopp, Vladimir Yanovsky Pore structure and permeability behavior of porous media under in-situ stress and pore pressure: Discrete element method simulation on digital core Jun Yao, Chunqi Wang, Xiaoyu Wang, Zhaoqin Huang, Fugui Liu, Quan Xu, Yongfei Yang Influence of Lorentz forces on forced convection of Nanofluid in a porous lid driven enclosure Yi Man, Mostafa Barzegar Gerdroodbary SUTTERBY NANOFLUID FLOW WITH MICROORGANISMS AROUND A CURVED EXPANDING SURFACE THROUGH A POROUS MEDIUM: THERMAL DIFFUSION AND DIFFUSION THERMO IMPACTS galal Moatimid, Mona Mohamed, Khaled Elagamy CHARACTERISTICS OF FLOW REGIMES IN SPIRAL PACKED BEDS WITH SPHERES Mustafa Yasin Gökaslan, Mustafa Özdemir, Lütfullah Kuddusi Numerical study of the influence of magnetic field and throughflow on the onset of thermo-bio-convection in a Forchheimer‑extended Darcy-Brinkman porous nanofluid layer containing gyrotactic microorganisms Arpan Garg, Y.D. Sharma, Subit K. Jain, Sanjalee Maheshwari A nanofluid couple stress flow due to porous stretching and shrinking sheet with heat transfer A. B. Vishalakshi, U.S. Mahabaleshwar, V. Anitha, Dia Zeidan ROTATING WAVY CYLINDER ON BIOCONVECTION FLOW OF NANOENCAPSULATED PHASE CHANGE MATERIALS IN A FINNED CIRCULAR CYLINDER Noura Alsedais, Sang-Wook Lee, Abdelraheem Aly Porosity Impacts on MHD Casson Fluid past a Shrinking Cylinder with Suction Annuri Shobha, Murugan Mageswari, Aisha M. Alqahtani, Asokan Arulmozhi, Manyala Gangadhar Rao, Sudar Mozhi K, Ilyas Khan CREEPING FLOW OF COUPLE STRESS FLUID OVER A SPHERICAL FIELD ON A SATURATED BIPOROUS MEDIUM Shyamala Sakthivel , Pankaj Shukla, Selvi Ramasamy
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen Preise und Aborichtlinien Begell House Kontakt Language English 中文 Русский Português German French Spain