Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Journal of Porous Media
Impact-faktor: 1.49 5-jähriger Impact-Faktor: 1.159 SJR: 0.504 SNIP: 0.671 CiteScore™: 1.58

ISSN Druckformat: 1091-028X
ISSN Online: 1934-0508

Volumes:
Volumen 22, 2019 Volumen 21, 2018 Volumen 20, 2017 Volumen 19, 2016 Volumen 18, 2015 Volumen 17, 2014 Volumen 16, 2013 Volumen 15, 2012 Volumen 14, 2011 Volumen 13, 2010 Volumen 12, 2009 Volumen 11, 2008 Volumen 10, 2007 Volumen 9, 2006 Volumen 8, 2005 Volumen 7, 2004 Volumen 6, 2003 Volumen 5, 2002 Volumen 4, 2001 Volumen 3, 2000 Volumen 2, 1999 Volumen 1, 1998

Journal of Porous Media

DOI: 10.1615/JPorMedia.v12.i5.20
pages 403-415

Shrinkage/Swelling Behavior of Knitted Fabrics during Relative Humidity Cycles Determined by X-ray Imaging

N. Bhouri
LERMAB-UMRINRA 1093, ENGREF 14, rue Girardet, 54042 Nancy Cedex, France; and LESTE, ENIM Avenue IBN ELJAZZAR, 5019 Monastir, Tunisie
Eric Badel
LERMAB-UMRINRA 1093, ENGREF 14, rue Girardet, 54042 Nancy Cedex, France
Sassi Ben Nasrallah
Laboratoire d'Études des Systèmes Thermiques et Énergétiques, Ecole Nationale d'Ingénieurs de Monastir, Monastir 5019 Tunisie
Patrick Perre
Laboratoire de Genie des Procedes et des Materiaux, Ecole Centrale Paris, CentraleSupelec, campus de Chatenay-Malabry Grande Voie des Vignes F-92 295 Chatenay-Malabry Cedex, Paris, France

ABSTRAKT

The 2D deformation of knitted jersey ready-to-wear clothing made of cotton was measured during adsorption and desorption steps. A digital x-ray imaging system was coupled with a climatic chamber to control temperature and relative humidity during the cycle. Images of the samples were recorded at each different equilibrium state of the cycle. Finally, an image correlation process was used to compare the recorded images and to determine the 2D strain. The deformations along course (εcc) and wale (εww) directions and the shear (εwc) were measured for four identical samples. The repeatability of the results shows the reproducibility of the measurement process. These original experimental results establish a clear anisotropic shrinkage and swelling behavior between the wale and course directions. The anisotropic ratio (εcc/εww) rises up to 2 during the adsorption step. Moreover, they enlighten a hysteresis between the adsorption and desorption steps. It denotes the effect of the material's history and it is explained by geometrical considerations of the structure at the microscopic level and the relationship with the manufacturing process. Finally, the shear strain is explained at the microscopic level by electronic microscopy (ESEM) observations that show the fibers' twist dissymmetry between the two wings of the stitch.


Articles with similar content:

DEVELOPMENT OF POLYMER COMPOSITES WITH IMPROVED THERMOPHYSICAL PROPERTIES FOR SHIPBUILDING AND SHIP REPAIR
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 2
S. V. Yakushchenko, А. А. Sapronov, A. V. Buketov, Mykola V. Brailo, S. A. Smetankin, A. V. Akimov
MICRO/MACRO MODELLING OF HEAT TRANSFER IN THE PROCESS OF COMPOSITE IN SITU FORMATION
ICHMT DIGITAL LIBRARY ONLINE, Vol.4, 2001, issue
Waldemar Wolczynski, Krystyna Rabczak
QUANTUM-MECHANICAL STUDY OF FRICTION IN NANOCONTACTS
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 3
Oleg I. Kaminsky, V. G. Zavodinsky
RESULTS OF PRODUCTION TESTS AND ANALYSIS OF DESTRUCTION MECHANISMS OF HOT FORGING DIES COVERED BY THE COMPOSITE „NITRIDING LAYER/CrN COATING”
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 2
Jan Walkowicz, Jerzy Smolik, Rafal Brudnias, Carmen Montero, Carlos Bertrand
ON THERMOCHEMICAL CHARACTERISTICS OF AP/NSAN/HTPB COMPOSITE PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Octavia Frota, Luis Araujo