Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Heat Pipe Science and Technology, An International Journal

ISSN Druckformat: 2151-7975
ISSN Online: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.2017019127
pages 217-233

EFFECT OF OFF-DESIGN INCIDENCE AND VARIABLE CAMBER MODE ON TANDEM STATOR CASCADES OF AXIAL COMPRESSOR

S. Sherin
Department of Aerospace Engineering, Indian Institute of Space Science and Technology, Thiruvananthapuram, 695547 India
M. P. Manas
Department of Aerospace Engineering, Indian Institute of Space Science and Technology, Thiruvananthapuram, 695547 India
S. R. Shine
Department of Aerospace Engineering, Indian Institute of Space Science and Technology, Trivandrum – 695547, Kerala, India

ABSTRAKT

The concept of tandem blade arrangement for axial compressors has been proposed to increase the work per stage without incurring large losses. Though several investigations have been carried out for design conditions, a detailed study of the off-design performance and a numerical study on variable camber mode operation of tandem cascades is lacking in the literature. Therefore, the main focus of the current study is to investigate the effect of off-design incidence and the feasibility of variable camber operation on the tandem cascade performance. The numerical study was conducted using a finite volume scheme which solves the RANS equations along with the Spalart−Allmaras turbulence model. Flow structures leading to the increase in losses in off-design cases have been investigated and the applicability of variable camber mode operation in off-design cases has been addressed.


Articles with similar content:

LARGE EDDY SIMULATION OF FREE-STREAM TURBULENCE EFFECTS ON HEAT TRANSFER TO A HIGH PRESSURE TURBINE CASCADE
TSFP DIGITAL LIBRARY ONLINE, Vol.6, 2009, issue
Sanjiva K. Lele, Rathakrishnan Bhaskaran
Trailing Edge Film Cooling of Gas Turbine Airfoils — Effects of Ejection Lip Geometry on Film Cooling Effectiveness and Heat Transfer
Heat Transfer Research, Vol.41, 2010, issue 8
Achmed Schulz, Hans-Jorg Bauer, Tim Horbach
Contribution To The Numerical analysis Of The Internal cooling Trailing Edge Geometry at Stationary And Rotating Conditions
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2017, issue
Ahmed Beniaiche, Carlo Carcasci, B. Facchini
Prediction of turbulent heat transfer around pin-fins
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Mi-Ae Moon, Kwang-Yong Kim
TRAILING EDGE FILM COOLING OF GAS TURBINE AIRFOILS – EFFECTS OF EJECTION LIP GEOMETRY ON FILM COOLING EFFECTIVENESS AND HEAT TRANSFER
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Achmed Schulz, Hans-Jorg Bauer, Tim Horbach