Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Journal of Enhanced Heat Transfer
Impact-faktor: 0.562 5-jähriger Impact-Faktor: 0.605 SJR: 0.175 SNIP: 0.361 CiteScore™: 0.33

ISSN Druckformat: 1065-5131
ISSN Online: 1026-5511

Volumes:
Volumen 26, 2019 Volumen 25, 2018 Volumen 24, 2017 Volumen 23, 2016 Volumen 22, 2015 Volumen 21, 2014 Volumen 20, 2013 Volumen 19, 2012 Volumen 18, 2011 Volumen 17, 2010 Volumen 16, 2009 Volumen 15, 2008 Volumen 14, 2007 Volumen 13, 2006 Volumen 12, 2005 Volumen 11, 2004 Volumen 10, 2003 Volumen 9, 2002 Volumen 8, 2001 Volumen 7, 2000 Volumen 6, 1999 Volumen 5, 1998 Volumen 4, 1997 Volumen 3, 1996 Volumen 2, 1995 Volumen 1, 1994

Journal of Enhanced Heat Transfer

DOI: 10.1615/JEnhHeatTransf.v17.i4.50
pages 343-352

Effects of Nanoparticle Parameters on Thermal Performance of the Evaporator in a Small Capillary Pumped Loop Using Nanofluid

Lun-Chun Lv
School of Mechanical and Power Engineering, Shanghai Jiaotong University
Zhenhua Liu
Shanghai Jiao Tong University, 800 Dong Chuan Rd. Minhang District, Shanghai 200240, China

ABSTRAKT

An experimental study was carried out to understand the effects of the nanoparticle parameters on the thermal performance of the evaporator in a capillary pumped loop (CPL) with nanofluid as the working fluid. The study focused on the influence of the nanoparticles mass concentration, the nanoparticle type, and the nanoparticle size on the heat transfer coefficient of the evaporator and the maximum heat flux. The experimental results indicated that the thermal performance of the evaporator in the CPL is improved with the addition of nanoparticles. There exists an optimal nanoparticles mass concentration corresponding to the maximum heat transfer enhancement. And the optimal nanoparticles mass concentrations are 1.0% and 0.5% for Cu nanofluid and CuO nanofluid, respectively. The nanoparticle type and the nanoparticle size influence the thermal performance of the CPL. The maximum heat flux is increased with the addition of nanoparticles in the working liquid.


Articles with similar content:

THERMAL CHARACTERISTICS OF CLOSED LOOP PULSATING HEAT PIPE WITH NANOFLUIDS
Journal of Enhanced Heat Transfer, Vol.18, 2011, issue 3
Sajad Arabnejad, Yadollah Saboohi, M. Behshad Shafii, Hamed Jamshidi
EFFECTS OF ORIENTATION AND CUO/WATER NANOFLUID ON THE PERFORMANCE OF A TWO-PHASE CLOSED THERMOSYPHON
Heat Pipe Science and Technology, An International Journal, Vol.1, 2010, issue 4
N. Alagappan, A.R. Ramanathan
USAGE OF A DIATOMITE-CONTAINING NANOFLUID AS THE WORKING FLUID IN A WICKLESS LOOP HEAT PIPE: EXPERIMENTAL AND NUMERICAL STUDY
Heat Transfer Research, Vol.49, 2018, issue 17
Ugur Karakaya, Halil Ibrahim Variyenli, Metin Gürü, Erdem Çiftçi, Adnan Sözen, Selçuk Keçel
HYSICAL PROPERTIES CHANGE AND HEAT TRANSFER ENHANCEMENT IN COMPACT-CHAMBER SPRAY COOLING USING HIGH-ALCOHOL SURFACTANT
International Heat Transfer Conference 16, Vol.14, 2018, issue
Hua Chen, Li-Jia Jiang, Wen-Long Cheng, Yu-Hang Peng
HEAT TRANSFER AND FLUID FLOW STUDY OF CuO-W/EG(50:50) NANOFLUIDS THROUGH ALUMINIUM MICROCHANNELS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Dasaroju Gangacharyulu, Harkirat Sandhu