Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v11.i1.40
pages 43-58

HYDRODYNAMIC AND ELECTRIC CHARACTERISTICS OF PLASMATRONS UNDER LAMINAR AND TURBULENT FLOW REGIMES

Oleg A. Sinkevich
Science Technological Center of Associated Institute for High Temperature, Russian Academy of Science and Moscow Power Engineering Institute (Technical University), Russia
S. E. Chikunov
Science Technological Center of Associated Institute for High Temperature, Russian Academy of Science and Moscow Power Engineering Institute (Technical University)
E. Kh. Isakaev
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint, Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia

ABSTRAKT

Numerical simulation modeling of laminar and turbulent plasma flows of an electric arc in plasma torches (plasmatrons) are examined in a wide range of working parameters (flow rates, currents, and channel diameters). The hydrodynamic and electric characteristics of plasmatrons in laminar and turbulent flows regimes and low-temperature argon plasma in plasma torches channels are studied. These calculations have confirmed our results previously obtained from analytical solutions: a. the generalized Poiseuille velocity profile for the viscous non-isothermal plasma flow in the plasma torch; b. the influence of the non-monotonous dependence of dynamic viscosity on plasma temperature on a flow structure and a friction coefficient; c. the dependencies of an axial gradient of pressure and the friction coefficient on electrical currents, on flow rates of the plasma forming gas and on internal diameters of the channel; d. the non-monotonous variation of viscosity on the cross section of plasmatron channels is generally the main reason for occurrence of two band points in the plasma velocity profile. Use of the specified technique has allowed to generalize results of experiments, precisely find the border of a turbulent regime flow in electric arcs, and to establish critical value of "effective" Reynolds number (Reef)cr = 2000


Articles with similar content:

CRITERION FOR TRANSITION FROM LAMINAR TO TURBULENT FLOWS OF ARGON IN PLASMATRONS
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
S. E. Chikunov, Oleg A. Sinkevich, Vasilii V. Glazkov, E. Kh. Isakaev
Friction factors and Nusselt numbers for fully developed laminar flow in annuli
International Heat Transfer Conference 12, Vol.10, 2002, issue
Charl G. Jat Du Toit
EFFECT OF THERMAL INSTABILITY ON FULLY DEVELOPED LAMINAE FLOW WITH INTERNAL HEAT GENERATION BETWEEN TWO HORIZONTAL PARALLEL PLATES
International Heat Transfer Conference 6, Vol.1, 1978, issue
Tsuyoshi Nakajima, M. Yamaguchi, Ryuichi Matsumoto
ANALYTICAL SOLUTION FOR MIXED CONVECTION IN A VERTICAL CIRCULAR DUCT WITH PARTIALLY INSULATED WALL
International Heat Transfer Conference 13, Vol.0, 2006, issue
Antonio Barletta, S. Lazzari
ANALYSIS OF RADIAL ENERGY LOSS IN AN ARC HEATER CHANNEL
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 2
I. Jakubova, J. Senk, A. Maslani, J. Gregor