Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2015015727
pages 37-69

DIGITAL IMAGE CORRELATION AND COMPLEX BIAXIAL LOADING TESTS ON THERMAL ENVIRONMENT AS A METHOD TO DETERMINE THE MECHANICAL PROPERTIES OF GH738 USING WARM HYDROFORMING

Yanfeng Yang
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Xiaoxing Li
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Rui Xiao
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
Hang Zhang
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China

ABSTRAKT

This paper mainly designs a high-precision digital image correlation (DIC) system and combines biaxial tensile tests with a DIC measuring system, which is successfully applied to determine the mechanical properties of the GH738 material subjected to multistage temperatures and complex loading paths. Firstly, uniaxial tensile tests of 2024 aluminum were made under different heat treatment conditions to validate the performance of the measuring system. Then, with the aim of ensuring the accuracy and reliability of the DIC measuring system, a series of GH738 biaxial tensile tests were made on a thermal environment biaxial tensile machine. In biaxial tensile tests, a GH738 cruciform specimen was designed and it was heated accurately from room temperature up to 1000°C using a heating furnace. Digital images of the GH738 cruciform specimen are recorded and subsequently processed by the DIC measuring system to extract a full-field true stress-strain curve which was calculated for different temperature phases and loading paths. The results indicate that in different temperature and loading path states, the mechanical properties of GH738 show obvious differences providing accurate mechanical properties data for hydroforming simulation and experiment. Based on the mechanical properties of GH738 measured by the high-temperature DIC system, the W-shaped seal ring, which is a vital component of jet engines, is simulated and tested with a good effect.


Articles with similar content:

MULTI-YIELD SURFACE MODELING OF VISCOPLASTIC MATERIALS
International Journal for Multiscale Computational Engineering, Vol.15, 2017, issue 2
Caglar Oskay, Hao Yan
THE INFLUENCE OF THE STRAIN RATE ON ULTIMATE PROPERTIES OF POLYMERS AND EXPERIMENTAL VERIFICATION OF THE LONG-TERM STRENGTH CRITERIA
Composites: Mechanics, Computations, Applications: An International Journal, Vol.5, 2014, issue 1
Yu. P. Zezin
Non-Contact Type Pulse Oximeter
Critical Reviews™ in Biomedical Engineering, Vol.47, 2019, issue 2
Anirudh Nandakumar Joshi, Amy L. Nystrom, Jeffrey T. La Belle
RESEARCH OF DYNAMICS OF MEAT FREEZING AT VARIOUS INTENSITIES OF CRYOTREATMENT
Journal of Enhanced Heat Transfer, Vol.25, 2018, issue 2
A. Drobyshev, Ainura Shinbayeva, A. Aldiyarov, M. Zhubaniyazova
ASSESSMENT OF THE PERFORMANCE OF ABLATIVE INSULATORS UNDER REALISTIC SOLID ROCKET MOTOR OPERATING CONDITIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.16, 2017, issue 1
Kenneth K. Kuo, Heath T. Martin, Andrew C. Cortopassi