Erscheint 4 Ausgaben pro Jahr
ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360
Indexed in
OXIDATION RESISTANCE OF STEEL SURFACE LAYER ALLOYED BY Mo AND Cr UNDER THE ACTION OF COMPRESSION PLASMA FLOWS
ABSTRAKT
The phase and element composition, microhardness of the carbon steel surface layer simultaneously alloyed with molybdenum and chromium atoms under the impact of compression plasma flows and subsequent annealing in air were investigated in this work. An X-ray diffraction analysis, scanning electron microscopy, energy dispersion microanalysis, and microhardness measurements were used as investigation techniques. The findings showed that the alloyed layer contained solid solutions on the basis of α-Fe and γ-Fe. An alloyed steel surface layer possessed better oxidation resistance at 400°C being compared with initial steel. Annealing resulted in the formation of an oxidized layer consisting of Fe2O3 and Fe3O4 phases. The presence of alloying elements like Mo and Cr was observed in this layer.
-
Bazylev, B., Janeschitz, G., Landman, I., Pestchanyi, S., Loarte, A., Federici, G., Merola, M., Linke, J., Hirai, T., Zhitlukhin, A., Podkovyrov, V., and Klimov, N., Behavior of Melted Tungsten Plasma Facing Components under ITER-like Transient Heat Loads: Simulations and Experiments, Fusion Eng. Design, vol. 83, pp. 1077-1081, 2008.
-
Birks, N., Meier, G.H., and Pettit, F.S., Introduction to High Temperature Oxidation of Metals, 2nd Ed., Cambridge, U.K.: Cambridge University Press, 2006.
-
Cherenda, N.N., Uglov, V.V., Anishchik, V.M., Stalmashonak, A.K., Astashinski, V.M., Kuzmitski, A.M., Thorwarth, G., and Stritzker, B., Modification of AISI M2 Steel Tribological Properties by Means of Plasma Mixing, Vacuum, vol. 81, pp. 1337-1340, 2007.
-
Cherenda, N.N., Shimanskii, V.I., Uglov, V.V., Astashinskii, V.M., and Ukhov, V.A., Nitriding of Steel and Titanium Surface Layers under the Action of Compression Plasma Flows, J. Surface Investigation. X-Ray, Synchrotron and Neutron Techniques, vol. 6, no. 2, pp. 319-325, 2012.
-
Cherenda, N.N., Basalai, A.V., Shymanski, V.I., Uglov, V.V., Astashynski, V.M., Kuzmitski, A.M., Laskovnev, A.P., and Remnev, G.E., Modification of Ti-6Al-4V Alloy Element and Phase Composition by Compression Plasma Flows Impact, Surface Coat. Technol., vol. 355C, pp. 148-154, 2018.
-
Escriva-Cerdan C., Ooi, S.W., Joshi, G.R., Morana, R., Bhadeshia, H.K.D.H., and Akid, R., Effect of Tempering Heat Treatment on the CO2 Corrosion Resistance of Quench-Hardened Cr-Mo Low-Alloy Steels for Oil and Gas Applications, Corrosion Sci., vol. 154, pp. 36-48, 2019.
-
Fu, J., Li, F., Sun, J., Cui, K., Du, X., and Wu, Y., Effect of Crystallographic Orientations on the Corrosion Resistance of Fe-17Cr Ferritic Stainless Steel, J. Electroanalyt. Chem., vol. 841, pp. 56-62, 2019.
-
Jung, K., Ahn, S., Kim, Y., Oh, S., Ryu, W.-H., and Kwon, H., Alloy Design Employing High Cr Concentrations for Mo-Free Stainless Steels with Enhanced Corrosion Resistance, Corrosion Sci., vol. 140, pp. 61-72, 2018.
-
Hao, X., Dong, J., Mu, X., Wei, J., Wang, C., and Ke, W., Influence of Sn and Mo on Corrosion Behavior of Ferrite-Pearlite Steel in the Simulated Bottom Plate Environment of Cargo Oil Tank, J. Mater. Sci. Technol., vol. 35, no. 5, pp. 799-811, 2019.
-
Ivanov, Yu.F., Krysina, O.V., Petrikova, E.A., Teresov, A.D., Shugurov, V.V., and Tolkachev, O.S., Complex Electron-Ion Plasma Treatment of Titanium: Methods, Structure, Properties, High Temp. Mater. Processes: An Int. Quart. High-Technol. Plasma Processes, vol. 21, no. 1, pp. 53-64, 2017.
-
Leyvi, A.Ya. and Yalovets, A.P., Numerical Study of Mass Transfer of a Material under Intense Flows of High-Speed Electrons and Plasma, IOP Conf. Series: J. Phys.: Conf. Series, vol. 830, pp. 012071-4, 2017.
-
Lyakishev, N.P., Equilibrium Diagrams of Binary Metal Systems, vol. 2, Moscow: Mashinostroenie Press, 1996 (in Russian).
-
Mabruni, E., Moch, S., Anwar, S., Romijarso, T.B.G., Adjiantoro, B., and Adnyana, D.N., Comparison of Strength, Microstructure and Corrosion Resistance of Stainless Steels Type 410 and Type 410-3Mo in Tempered Condition, Mater. Today: Proc., vol. 13, part 1, pp. 121-126, 2019.
-
Mikhalev, A.D., Dyadyura, K.A., Lebedynskyi, I., Bratushka, S.N., and Kravchenko, Ya.O., Structure, Morphology, and Elemental-Phase Composition of J02002 Steel as a Result of Electrolytic-Plasma Processing, High Temp. Mater. Processes: An Int. Quart. High-Technol. Plasma Processes, vol. 23, no. 1, pp. 25-36, 2019.
-
Moon, J., Ha, H.-Y., Park, S.-J., Lee, T.-H., Jang, J.H., Lee, C.-H., Han, H.N., and Hong, H.-U., Effect of Mo and Cr Additions on the Microstructure, Mechanical Properties and Pitting Corrosion Resistance of Austenitic Fe-30Mn-10.5Al-1.1C Lightweight Steels, J. Alloys Compnd., vol. 775, pp. 1136-1146, 2019.
-
Ramesh, S., Prabu, R., and Natarajan, E., Experimental Investigation of Structure, Wear, and Erosion Resistance of SS316 Substrate Coated with TiC-Al2O3 Composite by Laser Cladding, High Temp. Mater. Processes: An Int. Quart. High-Technol. Plasma Processes, vol. 22, no. 1, pp. 63-71, 2018.
-
Savastenko, N.A., Filatova, I.I., Lyushkevich, V.A., Chubrik, N.I., Goncharik, S.V., and Maskevich, S.A., Effect of Dielectric Barrier Discharge Plasma Treatment on the Photoluminescence and Photocatalytic Properties of ZnO Powder, High Temp. Mater. Processes: An Int. Quart. High-Technol. Plasma Processes, vol. 21, no. 2, pp. 127-142, 2017.
-
Shymanski, V.I., Cherenda, N.N., Uglov, V.V., Astashynski, V.M., and Kuzmitski, A.M., Structure and Phase Composition of Nb/Ti System Subjected to Compression Plasma Flow Impact, Surface Coat. Technol., vol. 278, pp. 183-189, 2015.
-
Takeda, M., Onishi, T., Nakakubo, S., and Fujimoto, S., Physical Properties of Iron-Oxide Scales on Si-Containing Steels at High Temperature, Materials Trans., vol. 50, no. 9, pp. 2242-2246, 2009.
-
Uglov, V.V., Anishchik, V.M., Astashynski, V.V., Astashynski, V.M., Ananin, S.I., Askerko, V.V., Kostyukevich, E.A., Kuz'mitski, A.M., Kvasov, N.T., and Danilyuk, A.L., The Effect of Dense Compression Plasma Flow on Silicon Surface Morphology, Surface Coat. Technol., vols. 158-159, pp. 273-276, 2002.
-
Zhang, C., Lv, P., Xia, H., Yang, Z., Konovalov, S., Chen, X., and Guan, Q., The Microstructure and Properties of Nanostructured Cr-Al Alloying Layer Fabricated by High-Current Pulsed Electron Beam, Vacuum, vol. 167, pp. 263-270, 2019.