Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v1.i4.40
pages 449-460

CONTINUOUS MONITORING OF METAL VOLATILISATION IN A PLASMA FURNACE BY INDUCTIVELY COUPLED PLASMA EMISSION SPECTROMETRY

C. Trassy
UPR 9033 CNRS - EPM, ENSHMG BP 95 - 38402 Saint-Martin-d'Heres - France
F. Petit
UPRES A 6015 CNRS - L.M.C.T.S. - Equipe "Plasma, Laser, Materiaux" 123, avenue Albert Thomas - 87060 Limoges Cedex - France
R. Diemiaszonek
LPCI - Bat. 401 - INSA - 69621 Villeurbanne - France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

ABSTRAKT

Several recent studies have shown that it is possible to use Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) in the online analysis of metals in flue gases produced by industrial processes. The limits of detection observed are very low, in the μg/m3 range. This technique has been used to monitor the gases in a plasma reactor devoted to treatment of fine dusts. It permitted us to follow the variations of metal concentrations in the gaseous phase and to evaluate the evaporation rate of various elements according to the reactor parameters. The response time of this technique is very fast, less than one minute in fact. The main difficulty is due to the changes in gas composition. These changes induce a variation in the method sensitivity. It results in errors in the measurement of the absolute concentrations. Solutions are proposed to overcome this difficulty. In spite of these disadvantages, such a method could be very useful in process control.


Articles with similar content:

TRUENESS AND PRECISION IN ON-LINE MONITORING OF METALLIC POLLUTANTS IN FLUE GASES BY ICP-OES
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
R. Diemiaszonek, C. Trassy, S. Hassaine
CONTINUOUS EMISSION MONITORING OF METALS IN FLUE GASES BY ICP-OES: ROLE OF CALIBRATION AND SAMPLE GAS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.5, 2001, issue 3
C. Trassy, Pierre Proulx, S. Hassaine
EFFECTS OF THE DC BIAS APPLIED TO A MG MOLTEN SILICON BATH ON ITS PURIFICATION BY RF THERMAL PLASMA
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.13, 2009, issue 3-4
S. Rousseau, Daniel Morvan, M. Benmansour
ON-LINE QUALIFICATION OF CHLORINATED DESORBED SPECIES RESULTING FROM POLLUTED ASHES BY LOW PRESSURE PLASMA PROCESS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.7, 2003, issue 3
Jacques Amouroux, P. Rousseau, S. Cavadias
IN SITU IR OPTICAL MEASUREMENTS OF GAS PROPERTIES IN A CAPACITIVELY COUPLED RF Ar/SiH4 PLASMA
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 1
G. Dingemans, W. W. Stoffels, G. M. W. Kroesen, J. Remy