Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v10.i2.50
pages 219-230

EFFECT OF TIME-DEPENDENT D.C. PLASMA FLOW ON PARTICLE TREATMENT

Erick Meillot
CEA/DAM Le Ripault, BP 16 - 37260 Monts - France
D. Guenadou
CEA, DEN, DTN, 13108, St Paul lès Durance Cedex
C. Bourgeois
Commissariat à l'Energie Atomique, CEA Le Ripault, BP 16, 37 260 Monts, France

ABSTRAKT

The D.C. plasma spraying process leads to coatings with high-level properties. The control of these properties implies to well overcome the process and in particular the interactions between the particles and plasma plume and between particles and substrate. The plasma jet exhibits high fluctuations outside the torch due to the arc root movements on the anode wall inside the torch. These movements result in a fluctuating plasma jet outside the torch and air engulfment. In this paper, a simple numerical model based on gas heating by JOULE effect in the anode is proposed to reproduce the flow transient behaviour. The predictions of the model (centreline velocities and temperatures of the gas) are compared with experimental values. Also, zirconia particles are injected in the transient simulated flow. Depending on the plasma plume stretching outside the torch and particle size, the particle trajectories, velocities and temperatures present high variations, leading to particle thermocinetic states at impact quite different from one particle to the other.


Articles with similar content:

OPTICAL DIAGNOSTICS TO CONTROL ON LINE MELTING OF SILICON MATERIAL TREATED BY THERMAL PLASMA PROCESS. NEW IMPROVEMENTS FACED WITH SEVERE CONDITIONS.
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 1
Jacques Amouroux, Amaury Poidatz, Sergey V. Dresvin, S. Darwiche, Daniel Morvan, E. Francke, M. Benmansour
INFLUENCE OF VOLTAGE FLUCTUATIONS RELATED TO PLASMA TORCH WORKING CONDITIONS ON ZIRCONIA PARTICLE THERMAL TREATMENT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.11, 2007, issue 2
Michel Vardelle, P. Granger, E. Nogues, Pierre Fauchais
Influence of I.R. radiation on target pyrometric measurement under plasma spraying conditions
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Michel Vardelle, Thierry Renault, Pierre Fauchais, Cedric Bossoutrot
Characterization of the acoustic behavior of an argon plasma torch
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.3, 1999, issue 2-3
A. Daif, B. Granier, J. M. Badie, J. Bresson
DESIGN OPTIMIZATION OF A MAGNETOPLASMADYNAMIC THRUSTER BY NUMERICAL METHODS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 1-2
Anatoly A. Kudryavtsev, Z. Ning, J. Ren, H. Liu, D. Yu, H. Tang, Stepan I. Eliseev, M. Li