Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
TsAGI Science Journal

ISSN Druckformat: 1948-2590
ISSN Online: 1948-2604

TsAGI Science Journal

DOI: 10.1615/TsAGISciJ.2019030117
pages 91-101

INVESTIGATIONS OF FLOW PARAMETERS IN MODELS OF PRECOMBUSTION DIFFUSERS WITH SECTIONED DUCTS

Natalya Valeryevna Guryleva
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky St., Zhukovsky, Moscow Region, 140180 Russia
Mikhail Anatolyevich Ivankin
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky Str., Zhukovsky, Moscow Region, 140180, Russian Federation
Dmitry Aleksandrovich Lapinsky
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky St., Zhukovsky, Moscow Region, 140180 Russia
Aleksander Mikhailovich Tereshin
Central Aerohydrodynamic Institute (TsAGI), 1, Zhukovsky Str., Zhukovsky, Moscow Region, 140180, Russian Federation

ABSTRAKT

The decelerating flow characteristics in a flow-through duct of a ramjet precombustion diffuser model have been considered. The possibility of improving the characteristics of the flow in front of the combustion chamber has been studied. A rectangular flow-through duct has been considered. The investigations were carried out on a rectangular three-stage intake model with a precombustion diffuser (isolator) at the Mach number of incoming flow (M = 3–4.9) in the SVS-2 wind tunnel at TsAGI and on a rectangular precombustion diffuser model at M = 2–3.2 in the TSSM wind tunnel at TsAGI. In both models, the ducts were divided by longitudinal separating partitions of various configurations. As a result of the experimental studies, the characteristics of the flow in the flow-through duct of the precombustion diffuser were revealed when partitioning the duct. The dependences of the main flow parameters in front of the combustion chamber on the structural features of the precombustion diffuser partitioning were obtained. It was shown that the presence of a gas-dynamic connection between the partitioned parts of the channel leads to significant alignment of the flow parameters at the end of the precombustion diffuser, increases the stability of its operation, and in some cases leads to the extension of the range of channel starting.


Articles with similar content:

Investigation of a Vortex Combustion Chamber with a Centrifugal Fluidized Bed
Heat Transfer Research, Vol.37, 2006, issue 8
V. V. Lukashov, A. V. Mostovoi
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF THE AIR FLOW AND HEAT TRANSFER ALONG THE ENTIRE DUCT OF A HYPERSONIC WIND TUNNEL
TsAGI Science Journal, Vol.50, 2019, issue 2
Rashid Anvarovich Davletkil'deev, Alena Sergeevna Rtishcheva, Sergei Mikhailovich Drozdov
DESIGN AND ANALYSIS OF A DUCTED CONTRA-ROTATING AXIAL FLOW FAN
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Masoud Boroomand, Ali Mohammadi, Hamzeh Eshraghi
EXPERIMENTAL INVESTIGATION OF PREMIXED AIR–FUEL MIXTURES AND OF THE COMBUSTION SPECIFICS OF DIFFUSION FUEL JETS
International Journal of Energy for a Clean Environment, Vol.18, 2017, issue 4
M. M. Guryanova, S. V. Veretennikov, O. A. Evdokimov, Alexander Igorevich Guryanov
CONCEPTION OF A THRUST REVERSING–VECTORING APPARATUS OF CASCADE TYPE WITH NUTATING VANES
TsAGI Science Journal, Vol.48, 2017, issue 5
O. V. Egorov, E. V. Myshenkov, E. Yu. Shelgunov, A. S. Polev