Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
International Journal for Multiscale Computational Engineering
Impact-faktor: 1.016 5-jähriger Impact-Faktor: 1.194 SJR: 0.452 SNIP: 0.68 CiteScore™: 1.18

ISSN Druckformat: 1543-1649
ISSN Online: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.2017020271
pages 239-264

A COUPLED COMPUTATIONAL APPROACH FOR THE SIMULATION OF SOIL EXCAVATION AND TRANSPORT IN EARTH-PRESSURE BALANCE SHIELD MACHINES

Thai Son Dang
Institute for Structural Mechanics, Ruhr-Universität Bochum
Nicola Wessels
Institute of Mechanics of Materials, Ruhr-Universität Bochum
Ngoc-Son Nguyen
GeM Institute, University of Nantes
Klaus Hackl
Ruhr University Bochum, Bochum, Germany
Günther Meschke
Institute for Structural Mechanics, Ruhr-Universität Bochum

ABSTRAKT

A prototype modeling framework for the coupled simulation of excavation processes at the tunnel face and the subsequent transport of the foam-soil mixture within the pressure chamber of EPB shield machines is proposed. The discrete element method is used for the modeling of soil excavation and the stabilized finite element method, using a non- Newtonian fluid model, is employed for the modeling of fluid transport. A variational approach is applied to directly obtain interparticle parameters of the DEM from a macroscopic strength criterion. A 2D numerical simulation model for a simplified representation of the cutting process at the tunnel face and the transport of the excavated soil-foam mixture is used to demonstrate the proposed coupled excavation-transport modeling approach. According to the proposed coupled DEM-FEM model, the mass flow obtained from the excavation simulation by means of the DEM serves as the input for the finite element flow simulation to generate the pressure distribution within the excavation chamber. It is shown that the proposed approach helps to obtain insight into the coupled excavation and transport processes at the tunnel face and the spatiotemporal distribution of the face pressure.


Articles with similar content:

NUMERICAL SIMULATION OF THE HEAT TRANSFER FOR FULLY DEVELOPED STRATIFIED WAVY OIL-WATER NON-NEWTONIAN TWO-PHASE FLOW IN PIPELINE
International Heat Transfer Conference 16, Vol.18, 2018, issue
M. H. Lin, J. F. Sun, Y. T. Liang, Yansong Li, D. H, Baoying Wang, S. C. Xin, D. Q. Ding, Guoxi He
ON SIMULATING PRIMARY ATOMIZATION USING THE REFINED LEVEL SET GRID METHOD
Atomization and Sprays, Vol.21, 2011, issue 4
Marcus Herrmann
Numerical study of turbulent spray combustion within the reverse flow combustor of a turboshaft engine
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Onur Tuncer, G. Öztarlik
Direct numerical simulation of turbulent two-phase flows: application to liquid sheet atomization
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Stephane Vincent, Jean-Luc Estivalezes
NUMERICAL SIMULATION OF TRANSIENT FLOWS IN A ROCKET PROPULSION NOZZLE
TSFP DIGITAL LIBRARY ONLINE, Vol.6, 2009, issue
Suryakant P. Nagdewe, Toshiaki Setoguchi, Heuy Dong Kim