Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
International Journal for Multiscale Computational Engineering
Impact-faktor: 1.016 5-jähriger Impact-Faktor: 1.194 SJR: 0.452 SNIP: 0.68 CiteScore™: 1.18

ISSN Druckformat: 1543-1649
ISSN Online: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.2012001697
pages 177-184

MULTI-SCALE MODELLING OF SNOW MICROSTRUCTURE

Anna Carbone
Applied Science and Technology Department, Politecnico di Torino,Torino, Italy; ETH Zurich, Switzerland
B. M. Chiaia
Department of Structural and Geotechnical Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy
B. Frigo
Department of Structural and Geotechnical Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy
C. Turk
Applied Science and Technology Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy

ABSTRAKT

A three-dimensional multiscale spatial model of snow with evolving microstructure is presented. Many engineering and environmental problems require a comprehensive understanding of snow behavior which arises as a consequence of phenomena spanning a wide spectrum of spatial length scales. Snow is classically described as a granular heterogeneous medium consisting of air and three water phases: ice, vapor, and liquid. The ice phase consists of grains arranged on a matrix according to a random load-bearing skeleton. The challenge is to achieve a detailed description of the mechanical and morphological characteristics of different snow microstructures that may have the same global density. Snow density can be determined by in situ measurements with quite good accuracy, and by means of the box-counting method, the fractal dimension of snow samples characterized by grains with different diameters could be determined. It was suggested that the fractal dimension can be adopted as a relevant parameter for quantifying snow morphology, in terms of the distribution of voids, and density over a wide range of spatial scales. In this work this concept is further developed. Snow density is simulated by means of a lacunar fractal, namely, a generalized Menger sponge. Then, a fully threedimensional invasive stochastic fractal model is adopted. This model performs a three-dimensional mapping of the snow density to a three-dimensional fractional Brownian field. In particular, snow samples with evolving microstructure are quantified as a continuous function of the fractal dimension.


Articles with similar content:

Direct-Inverse Analysis of Heat Transfer in Micro-Models of Porous Media
International Heat Transfer Conference 15, Vol.40, 2014, issue
Carolina Palma Naveira-Cotta
COMPARING THREE IMAGE PROCESSING ALGORITHMS TO ESTIMATE THE GRAIN-SIZE DISTRIBUTION OF POROUS ROCKS FROM BINARY 2D IMAGES AND SENSITIVITY ANALYSIS OF THE GRAIN OVERLAPPING DEGREE
Special Topics & Reviews in Porous Media: An International Journal, Vol.6, 2015, issue 1
Arash Rabbani, Shahab Ayatollahi
A GENERALIZED STOCHASTIC SOLUTE TRANSPORT MODEL FOR MULTISCALE DISPERSION IN POROUS MEDIA
Journal of Porous Media, Vol.15, 2012, issue 2
Don Kulasiri, Sandhya Samarasinghe, Hong Ling
Radiation transfer modeling by a ray-tracing method and a CK or k approach
International Heat Transfer Conference 12, Vol.5, 2002, issue
Jean Taine, O. Penanhoat, Estelle Iacona, O. Guignard, Ph. Picot
NEURAL NETWORK MODEL FOR ON-LINE THERMAL MARGIN ESTIMATION OF A NUCLEAR POWER PLANT
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1992, issue
Soon-Heung Chang, Seung-Hyuk Lee, Hyun-Koon Kim