Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 0.7

ISSN Druckformat: 1940-2503
ISSN Online: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2012004762
pages 225-242

NUMERICAL STUDY OF PYROLYSIS GAS FLOW AND HEAT TRANSFER INSIDE AN ABLATOR

Naoya Hirata
Department of Aeronautics and Astronautics, Kyushu University, Fukuoka, Japan
Sohey Nozawa
Research and Education Center of Carbon Resources, Kyushu University, Fukuoka, Japan
Y. Takahashi
Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, Sagamihara, Japan
H. Kihara
Department of Aeronautics and Astranautics, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan
Ken-ichi Abe
Department of Aeronautics and Astronautics, Kyushu University, Motooka, Nishi-ku, Fukuoka 819-0395

ABSTRAKT

A numerical simulation of a lightweight ablator in an arc-heated flow was carried out. Thermal response analysis of the ablator was coupled with thermochemical nonequilibrium analysis of an arc jet around the ablator. In the thermal response analysis, the pyrolysis gas flow inside the ablator was calculated in detail by solving the conservation equations. Phenomena such as heat conduction, pyrolysis of resin, surface reactions, and recession were also considered in the simulation. Furthermore, in order to evaluate the injection of the ablation gas (pyrolysis gas and carbonaceous gas generated by the surface reactions) from the ablator surface into the outer flow field, a computational fluid dynamics code was extended by including further chemical species besides those in the previous study. This also allowed the simulations for wider-range flow conditions such as a nitrogen flow and airflow. The simulation was conducted for flow conditions of a 20 kW arc−heated nitrogen flow and a 750 kW arc−heated airflow. The results from the former simulation were compared with the experimental data and the computational results using other models. This comparison showed that the effect of the pyrolysis gas flow on the thermal response was significant, and thus the detailed analysis considering the multidimensional pyrolysis gas flow led to a considerable improvement of the predictive performance.


Articles with similar content:

COUPLING PROCESS ANALYSIS ON THE FLOW AND HEAT TRANSFER OF HYDROCARBON FUEL WITH PYROLYSIS AND PYROLYTIC COKING UNDER SUPERCRITICAL PRESSURES
International Heat Transfer Conference 16, Vol.6, 2018, issue
Chaofan Zhao, Hongwei Wu, Zhi Tao, Jianqin Zhu, Xizhu Hu
Large eddy simulation of unsteady effects of combustion processes in HCCI engine
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Amsini Sadiki, Dmitry Goryntsev
THERMAL PARTIAL OXIDATION OF DIESEL IN POROUS REACTORS FOR SYNTHESIS GAS PRODUCTION
International Journal of Energy for a Clean Environment, Vol.7, 2006, issue 4
Dimosthenis Trimis, Z. Al-Hamamre, Franz von Issendorff, A. Mach, S. Deizinger
MODELING OF n-HEPTANE SPRAYS INJECTED THROUGH MULTI-HOLE TYPE GDI INJECTOR
Atomization and Sprays, Vol.22, 2012, issue 3
Sungwook Park, Sanghoon Lee, Yunjung Oh
FLOW FIELD AND HEAT TRANSFER ANALYSIS IN AMON/MMH BIPROPELLANT ROCKET ENGINE
International Journal of Energetic Materials and Chemical Propulsion, Vol.16, 2017, issue 3
Hiroumi Tani, Yoshiki Matsuura, Shinichi Takata, Yu Daimon, Hideyo Negishi, Shigeyasu Iihara