Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 1.4

ISSN Druckformat: 1940-2503
ISSN Online: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2018024378
pages 147-160

BENCHMARKS FOR THE VALIDATION OF THE HEAT TRANSFER CAPABILITIES OF ONE-DIMENSIONAL SYSTEM CODES

Charl G. Jat Du Toit
School of Mechanical and Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom 2520, South Africa
N. I. Tak
Korea Atomic Energy Research Institute, Deajeon, Korea
Peter F. Niemand
School of Mechanical and Nuclear Engineering, North-West University, Potchefstroom, South Africa
M. H. Kim
Korea Atomic Energy Research Institute, Deajeon, Korea

ABSTRAKT

The purpose of the reactor cavity cooling system in a nuclear plant is to effectively remove the heat released by the reactor pressure vessel. The reactor cavity cooling system must be able to operate safely in a natural or passive manner, particularly in the case of very high-temperature reactors in order to avoid accidents due to human error or the failure of components. Radiation, convection, and conduction heat transfer, as well as natural circulation, are the major natural phenomena that determine the performance of a reactor cavity cooling system. System codes are often used to simulate the operation of a reactor cavity cooling system under various conditions. It is important that the codes should be verified and validated. This is achieved by performing carefully controlled experiments and selecting suitable analytical examples. The experiments and analytical examples are modeled using the codes, and the simulation results obtained by the codes are then compared with the corresponding experimental and analytical results. This paper is concerned with two benchmark problems for which the analytical solutions can be obtained and used to validate the heat transfer capability of systems codes to model conduction, radiation, and convection. The systems codes GAMMA+ and Flownex are employed to demonstrate the application of the benchmark problems.


Articles with similar content:

TEST PROBLEMS FOR THE VERIFICATION AND VALIDATION OF THE RADIATION, CONDUCTION AND CONVECTION CAPABILITIES OF SYSTEM CODES
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2017, issue
Nam-il Tak, Peter F. Niemand, Min-Hwan Kim, Charl G. Jat Du Toit
1D and 3D Numerical Simulation of the Reactor Cavity Cooling System of a Very High Temperture Reactor
International Heat Transfer Conference 15, Vol.10, 2014, issue
Jisu S. Jun, Charl G. Jat Du Toit, Jae-Man Noh, Pieter G. Rousseau
ENGINEERING APPROACH FOR THERMAL CALCULATIONS OF HEAT TRANSFER IN HEAT-RELEASED ROD BUNDLES COOLED BY NATURAL CONVECTION AND RADIATION
International Journal of Energy for a Clean Environment, Vol.14, 2013, issue 1
Vladimir Fromzel, Mikhail Gotovskii
Applicability of 3-D Mathematical Models of Thermal Equipment in the Development of Expert Systems
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1992, issue
M. Nogueira, Pedro J. M. Coelho, Maria da Graca Carvalho
ESCADRE MODO AND RALOC MOD2 ASSESSMENT MAJOR FINDINGS AND RELEVANCE TO THE SAFETY OF LWRS
ICHMT DIGITAL LIBRARY ONLINE, Vol.9, 1995, issue
A. Mailliat, C. Renault, B. Schwinges