Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Atomization and Sprays
Impact-faktor: 1.737 5-jähriger Impact-Faktor: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Druckformat: 1044-5110
ISSN Online: 1936-2684

Volumes:
Volumen 30, 2020 Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v12.i4.20
pages 387-401

IMPROVED TAB MODEL FOR PREDICTION OF SPRAY DROPLET DEFORMATION AND BREAKUP

Jong-Hoon Park
School of Mechanical and Aerospace Engineering, Seoul National University, Seoul, Korea
Youngbin Yoon
Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul, 08826, Republic of Korea
Sang-Soon Hwang
Department of Mechanical Engineering, University of Inchon, Inchon, Korea

ABSTRAKT

An improved Taylor analogy breakup (TAB) model been proposed for more accurate prediction of the deformation and breakup of a spray. Especially, the effects of the droplet deformation on the droplet aerodynamic external force are considered in this model, which was neglected in the TAB model. It is found that the predicted droplet deformation using the present improved TAB model shows better agreement with experimental data than those of other models for the droplets in both bag-type and shear-type breakup regimes. A new breakup criterion has been proposed to predict more reasonable breakup quantities, such as breakup deformation length and breakup time; it is defined that the breakup occurs when the internal liquid-phase pressure of the deformed droplet at the equator is greater than that at the pole. The proposed breakup criterion shows more physical relationship between the degree of droplet deformation at breakup and the corresponding breakup Weber number as compared with the results using the TAB and the droplet deformation (DDB) models. Therefore, it provides better predictions of the experimental data than the TAB and DDB models for the droplet deformation and breakup time in both the bag-type and shear-type breakup regimes.


Articles with similar content:

AXISYMMETRIC SIMULATIONS OF DROP DEFORMATION AND BREAKUP FOR VALIDATION OF A MODIFIED TAYLOR ANALOGY BREAKUP MODEL
Atomization and Sprays, Vol.27, 2017, issue 5
Franz X. Tanner, Kathleen A. Feigl, Chao Liang
THE FORMATION OF DROPS FROM VISCOELASTIC LIQUID JETS AND SHEETS−AN OVERVIEW
Atomization and Sprays, Vol.27, 2017, issue 4
Günter Brenn, Gregor Plohl
Application of a Dewatering Model for Fibroporous Media under Constrained Uniaxial Compression
Journal of Porous Media, Vol.8, 2005, issue 5
Jeffrey G. Lounghran, Mei Duan
ON THE EFFECT OF THE CONTACT ANGLE HYSTERESIS FOR SMALL DROPLETS ON A WETTABILITY GRADIENT SURFACE
Interfacial Phenomena and Heat Transfer, Vol.4, 2016, issue 1
Marc Miscevic, Pascal Lavieille, Felipe M. Mancio Reis, Stephane Blanco
STATIC AND DYNAMIC DROP FORMATION ON DOWNWARD-FACING NOZZLES
Atomization and Sprays, Vol.23, 2013, issue 7
Michael Zeilmann, U. Acikel, Mathias Etzold, Franz Durst, R. Gautam