Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Atomization and Sprays
Impact-faktor: 1.262 5-jähriger Impact-Faktor: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Druckformat: 1044-5110
ISSN Online: 1936-2684

Volumes:
Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2013008287
pages 41-80

DEVELOPMENT OF A NEW SPRAY/WALL INTERACTION MODEL FOR DIESEL SPRAY UNDER PCCI-ENGINE RELEVANT CONDITIONS

Yanzhi Zhang
School of Energy and Power Engineering, Dalian University of Technology, P. R. China
Ming Jia
School of Energy and Power Engineering, Dalian University of Technology, Dalian 116024, China
Hong Liu
School of Energy and Power Engineering, Dalian University of Technology, P. R. China
Maozhao Xie
Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, Dalian University of Technology, Dalian City, P.R. China
Tianyou Wang
State Key Laboratory of Engines, Tianjin University, 92 Weijin Road, Tianjin 300072, China
Lei Zhou
Center for Combustion Energy, Tsinghua University, P. R. China

ABSTRAKT

A new spray/wall interaction model was developed with special emphasis on the premixed charge compression ignition (PCCI) engine-relevant conditions, i.e., high injection pressure and intermediate-to-high backpressure. The new model distinguishes between dry wall and wetted wall for a description of the complicated spray/wall interaction process. The dry wall impingement regimes include deposition and splash, whereas the wetted wall regimes consist of stick, rebound, spread, and splash. The regime transition thresholds of splash are determined based on recent experimental observations, which can account for the wide ranges of conditions related to engines. By using an updated log-normal distribution function, the sizes of the secondary droplets are determined in the improved model, which is more suitable to describe the atomization process of the secondary droplets formed by splash. Moreover, the velocities of the secondary droplets are determined by a Nukiyama-Tanasawa distribution function derived from the experimental measurements, and the ejection angle of the secondary droplet is assumed to be in the interval (2°, 30°) uniformly, which is reasonable for high injection pressure. In order to validate the new spray/wall interaction model, comparisons of the predictions from the present model with the experimental measurements and predictions from a previous spray/wall interaction model were conducted. The results indicate that the numerical predictions from the new model illustrate better agreements with the experimental data than those of the previous model, especially in the case with high injection pressure under PCCI-engine relevant conditions.