Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Atomization and Sprays
Impact-faktor: 1.262 5-jähriger Impact-Faktor: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Druckformat: 1044-5110
ISSN Online: 1936-2684

Volumes:
Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2014011350
pages 47-80

ATOMIZATION MODELLING OF LIQUID JETS USING A TWO-SURFACE-DENSITY APPROACH

Bejoy Mandumpala Devassy
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Chawki Habchi
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Eric Daniel
Aix-Marseille Universite, IUSTI, 5 rue E. Fermi 13453 Marseille Cedex 13, France

ABSTRAKT

In internal combustion engines, the liquid fuel injection is an essential step for the air/fuel mixture preparation and the combustion process. Indeed, the structure of the liquid jet coming out from the injector plays a key role in the proper mixing of the fuel with the gas in the combustion chamber. The present work focuses on the liquid jet atomization phenomena under diesel engine conditions. Under these conditions, liquid jet morphology is assumed, including a separate liquid phase (i.e., a liquid core) and a dispersed liquid phase (i.e., a spray). This article describes the developmental stages of a new atomization model, for a high-speed liquid jet, based on an Eulerian-Eulerian two-fluid approach. The atomization phenomena are modelled by defining different surface density equations for the liquid core and the spray droplets. This new model has been coupled with a turbulent and highly compressible two-fluid system of equations. The process of ligament breakup and its subsequent breakup into droplets are handled by acquiring knowledge from the available high-fidelity experiments and numerical simulations. In the dense region of the liquid jet, the atomization is modelled as a dispersion process due to the stretching of the interface, from the liquid side in addition to the gas side. The model results have been compared to a recently published DNS results under typical direct injection diesel engine conditions. In particular, it has been shown that the interface instabilities and the turbulence in the leading tip of the liquid core play a major role in the primary atomization of diesel jets.


Articles with similar content:

EFFECTS OF DIFFERENT TURBULENT DISPERSION AND SPRAY BREAKUP MODELS ON THREE-DIMENSIONAL MODELING OF IN-CYLINDER FUEL SPRAY
Computational Thermal Sciences: An International Journal, Vol.5, 2013, issue 1
M. Mofarrahi, Reza Kamali
DIRECT NUMERICAL AND LARGE-EDDY SIMULATION OF PRIMARY ATOMIZATION IN COMPLEX GEOMETRIES
Atomization and Sprays, Vol.23, 2013, issue 11
Peter Brady, Mark Owkes, Olivier Desjardins, Jeremy McCaslin
REAL-TIME X-RAY RADIOGRAPHY STUDY OF LIQUID JET BREAKUP FROM ROCKET ENGINE COAXIAL INJECTORS
International Journal of Energetic Materials and Chemical Propulsion, Vol.3, 1994, issue 1-6
R. D. Woodward, Fan Bill Cheung, R. L. Burch
UNSTEADY EFFECTS ON MIXING AND COMBUSTION PROCESSES IN A REALISTIC IC-ENGINE BY USING LARGE EDDY SIMULATION
TSFP DIGITAL LIBRARY ONLINE, Vol.7, 2011, issue
Johannes Janicka, Amsini Sadiki, Dmitry Goryntsev
EFFECTS OF NONCONDENSABLE GAS ON CAVITATING NOZZLES
Atomization and Sprays, Vol.25, 2015, issue 6
Michele Battistoni, Daniel Duke, Andrew B. Swantek, Sibendu Som, Christopher F. Powell, F. Zak Tilocco