Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Druckformat: 2152-5102
ISSN Online: 2152-5110

Volumes:
Volumen 47, 2020 Volumen 46, 2019 Volumen 45, 2018 Volumen 44, 2017 Volumen 43, 2016 Volumen 42, 2015 Volumen 41, 2014 Volumen 40, 2013 Volumen 39, 2012 Volumen 38, 2011 Volumen 37, 2010 Volumen 36, 2009 Volumen 35, 2008 Volumen 34, 2007 Volumen 33, 2006 Volumen 32, 2005 Volumen 31, 2004 Volumen 30, 2003 Volumen 29, 2002 Volumen 28, 2001 Volumen 27, 2000 Volumen 26, 1999 Volumen 25, 1998 Volumen 24, 1997 Volumen 23, 1996 Volumen 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v36.i4.60
pages 375-390

Flow Characteristics of Double Offset S-Shaped Circular Diffusing Duct

Rajesh K. Singh
Department of Applied Mechanics, IIT Delhi, New Delhi-110016
S. N. Singh
Department of Applied Mechanics, IIT Delhi Hauz Khas, New Delhi, India
V. Seshadri
Department of Applied Mechanics, IIT Delhi Hauz Khas, New Delhi, India

ABSTRAKT

Effect of Reynolds number and horizontal offset for a fixed vertical offset has been investigated for a double offset S-shaped circular diffusing duct using a CFD code FLUENT. The investigations have been carried out for a fixed geometry using different turbulence models and it is observed that the RNG turbulence model gives the closest matching with experimental results. Investigations have shown that at high Reynolds numbers (≈ 106), there is no effect of Reynolds number on the performance of the diffuser. Secondary flow distribution has shown the formation of two pairs of contra rotating vortices at the exit plane and beyond. The core of the flow moves along the diagonal plane which is inclined to vertical axis at an angle determined by the magnitude of horizontal offset i. e. 15°/15° offset gives an angle of 30° whereas 30°/30° offset gives an angle of approximately 60°.


Articles with similar content:

Combined Effects of Rotation and Skew Angle on the Convective Heat Transfer in a Two-pass Passage with a 180-degree Turn
Journal of Enhanced Heat Transfer, Vol.7, 2000, issue 3
K. Nabana, yutaka Asako, MinKing K. Chyu, Y. Yamaguchi
Effects of Rib Height on Heat Transfer Performance Inside a High Aspect Ratio Channel with Inclined Ribs
Journal of Enhanced Heat Transfer, Vol.10, 2003, issue 4
Akira Murata, Robert Kiml, Sadanari Mochizuki
FLOW CHARACTERISTICS IN TWO INTERSECTING FLOW PASSAGES
Journal of Flow Visualization and Image Processing, Vol.4, 1997, issue 1
Wen-Jei Yang, Jongmin Shin
ASYMMETRIC VORTEX FLOW WITH DOUBLE VORTEX BREAKDOWN ON A DELTA WING AT ZERO SIDESLIP
TsAGI Science Journal, Vol.50, 2019, issue 2
Konstantin Anatolievich Osipov
LAMINAR FREE CONVECTION BETWEEN TWO VERTICAL PARALLEL PLATES WITH DIFFERENT RIB HEIGHTS AND POSITIONS
International Heat Transfer Conference 16, Vol.9, 2018, issue
Viktor I. Terekhov, Khalil F. Yassin, Ali L. Ekaid