Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
Interfacial Phenomena and Heat Transfer
ESCI

ISSN Druckformat: 2169-2785
ISSN Online: 2167-857X

Open Access

Interfacial Phenomena and Heat Transfer

DOI: 10.1615/InterfacPhenomHeatTransfer.2018021373
pages 321-335

COMBINED EFFECT OF SUBSTRATE WETTABILITY AND THERMAL PROPERTIES ON EVAPORATION DYNAMICS OF A SESSILE DROPLET

Sachin K. Singh
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Mohit Gogna
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, India
Krishnamurthy Muralidhar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India
Sameer Khandekar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016, India

ABSTRAKT

The prediction and manipulation of sessile droplet evaporation is an important problem with applications such as in microfluidics, printing, and microfabrication. The simple vapor diffusion model is frequently used to model droplet evaporation for the prediction of interfacial evaporation rates and evaporative flux, under the premise that vapor mass diffusion is the only physical transport mechanism responsible for droplet evaporation. However, droplet evaporation is known to be governed by additional transport mechanisms. Two of these are evaporative cooling at the air-liquid interface and heat conduction in the solid-liquid-gas domain. Furthermore, sessile droplet evaporation is also limited by the substrates' characteristics, specifically thermal properties and surface wettability. Hence, an extended vapor diffusion model has been built in COMSOL that incorporates the additional transport mechanisms and predicts evaporation rates, interfacial evaporative flux, and temperature distribution around the sessile droplet. This model has first been validated against controlled laboratory experiments for sessile droplet evaporation of water on copper and glass substrates, with distinct wettability. Subsequently, the model is used to discern the combined effect of substrate thermal properties and wettability on the evaporation dynamics of a sessile droplet. Results show that droplet evaporation on a highly hydrophobic or low thermal conductivity substrate is accompanied by significant lowering of temperature at the liquid-gas interface. This limits the capability of a simple vapor diffusion model to correctly predict droplet evaporation rates for such substrates. The extended vapor diffusion model, however, takes interfacial evaporative cooling and substrate properties into account and correctly predicts the ensuing evaporation rates. Specifically, when a sessile droplet evaporates on a low wettability and low thermal conductivity substrate, their combined effect causes a large drop in its evaporation rates, relative to what is estimated using a pure vapor diffusion model.


Articles with similar content:

Development of an Empirical Model for Convective Evaporation of Sessile Droplets of Volatile Fluids
International Heat Transfer Conference 15, Vol.18, 2014, issue
David Brutin, Florian Carle
A NUMERICAL STUDY OF THE DESALINATION SOIL BY DRY DRAINAGE PROCESS
Journal of Porous Media, Vol.15, 2012, issue 7
Habib Sammouda, Rachid Bennacer, M. Adala
COATING DEPOSITION BY THERMAL SPRAY PROCESSES
Annual Review of Heat Transfer, Vol.20, 2017, issue 1
Sanjeev Chandra
Evaporation of Water Drop on Photo-Induced Hydrophilic Surface
International Heat Transfer Conference 12, Vol.37, 2002, issue
Sumitomo Hidaka, Yasuyuki Takata, Masataka Masuda, Hiroshi Yamamoto, Takehiro Ito
A 3D COMPUTATIONAL MODEL OF HEAT TRANSFER COUPLED TO PHASE CHANGE IN MULTILAYER MATERIALS WITH RANDOM CONTACTS
International Heat Transfer Conference 13, Vol.0, 2006, issue
M. Amara, Graham de Vahl Davis, Eddie Leonardi