RT Journal Article ID 41643ddd3d49df2b A1 Haugsrud, Reidar A1 Kvernes, Ingard A1 Lugscheider, Erick T1 ON THE OXIDATION OF Ni-23Co-17Cr-12AI-0.5Y-ALLOY SERVING AS BOND COAT IN THERMAL BARRIER COATINGS JF High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes JO HTM YR 2000 FD 2000-09-01 VO 4 IS 3 OP 12 AB Specimens of air plasma sprayed thermal barrier coatings with a Ni-23Co-17Cr-12Al-0.5Y bond coat have been oxidised in air at 900°C for 300-3000 hours. The oxide scale formed between the ceramic and the bond coat consists of essentially pure AI2O3, except at the interface with the ceramic overlay, where the composition of the oxide reflects that of the bond coat. The oxidation rate decreases with time and reflects growth of AI2O3, through inward grain boundary diffusion of oxygen. An inter-metallic phase identified as NiAl, precipitated during high temperature exposure. The thickness of the inter-metallic zone decreased with increasing oxidation duration. This was interpreted to reflect diffusion of Al toward the oxide and into the substrate. The amount of transient oxides at the surface was found to depend on the surface topography. PB Begell House LK https://www.dl.begellhouse.com/journals/57d172397126f956,372275bd2b51feb1,41643ddd3d49df2b.html