Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer


DOI: 10.1615/ICHMT.2011.TMNN-2011.270
page 8

Mihail Chirtoc
Thermophysics Laboratory, GRESPI, University of Reims, BP 1039, 51687 Reims Cedex 2, France

Nicolas Horny
Université de Reims Champagne Ardenne URCA, GRESPI, Multiscale Thermophysics Lab., Moulin de la Housse BP 1039, Reims, 51687 France

Ismail Tavman
Dokuz Eylul University

Alpaslan Turgut
Mechanical Engineering Department, Dokuz Eylul University, 35100 Bornova Izmir, Turkey

Iskender Kokey
Dokuz Eylul University, Mechanical Engineering Department, Bornova, Izmir, 35100 Turkey

Maria Omastova
Polymer Institute, SAS, Dúbravská cesta 9, Bratislava, 845 41 Slovakia


This work aimed at thermal transport characterization of high density polyethylene (HDPE) filled with two sizes (5 and 50 μm) of expanded graphite (EG) particles. Sample platelets were produced by melt mixing followed by compression molding. Thermal conductivity k was determined by combining measurements of density, specific heat capacity and thermal diffusivity. For the latter, we used the self-checking, non-contact method of photothermal radiometry (PTR) in back detection configuration. Starting from an effective medium approximation model, we derived a simple linearized expression for the effective k of composites with low particle charge. It explains the unusually high experimental k values (up to four-fold increase) as the effect the strongly nonspherical EG particles (aspect ratio 1/p = 110−290). Larger particle sizes produce higher k enhancement, while the interfacial thermal resistance (Rbd = 2.1·10−7 m2·K/W) has an opposite effect on k. The eventual deviation of experimental k from the model at high particle charge is possibly due to limitation of interparticle free space preventing random orientation of high aspect ratio particles.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH