Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer

Heat transfer due to turbulent flow water in metal foam: limited experimental results and difficulties

DOI: 10.1615/ICHMT.2015.THMT-15.2000
pages 879-882

Ozer Bagci
Istanbul Technical University, Makina Fakultesi, Gumussuyu, 34437, Istanbul, Turkey; Department of Flow, Heat and Combustion Mechanics, University of Ghent, Ghent, Belgium

Nihad Dukhan
Department of Mechanical Engineering University of Detroit Mercy, Detroit, MI 48334, USA

Mustafa Ozdemir
Istanbul Technical University, Makina Fakultesi, Gumussuyu, 34437, Istanbul, Turkey; Department of Mechanical Engineering, University of Detroit Mercy, 4001 W. McNichols Rd., Detroit, MI 48221, USA

A. Arbak
Makina Fakültesi, Istanbul Technical University,Gümüssuyu, 34437, Istanbul, Turkey

Abstrakt

Open-cell metal foams continue to receive considerable attention as excellent cores for heat transfer enhancement and heat exchange designs. These foams have high conductivities and substantial surface area density. Turbulent heat transfer in metal foam has received very little study. In this paper, preliminary experimental convection heat transfer results for turbulent flow of water in a tube brazed to commercial aluminum foam are presented. The tube had a length of 30.50 cm in the flow direction, an inside diameter of 5.08 cm and wall thickness 0.63 cm; it was subjected to constant heat flux at the wall. The porosity of the foam was 87.6 %. Measurements included wall temperature along flow direction as well as average inlet and outlet temperatures of the water. More importantly, the issues and difficulties in the experimental work are highlighted, and they will be used in designing a more durable set-up for future experiments.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH