Abo Bibliothek: Guest
TURBINE-09. Proceedings of International Symposium on Heat Transfer in Gas Turbine Systems
August, 9-14, 2009, Antalya, Turkey

DOI: 10.1615/ICHMT.2009.HeatTransfGasTurbSyst


ISBN Print: 978-1-56700-263-8

TRAILING EDGE FILM COOLING OF GAS TURBINE AIRFOILS – EFFECTS OF EJECTION LIP GEOMETRY ON FILM COOLING EFFECTIVENESS AND HEAT TRANSFER

page 14
DOI: 10.1615/ICHMT.2009.HeatTransfGasTurbSyst.60
Get accessGet access

ABSTRAKT

The present paper concentrates on trailing edge film-cooling of modern high-pressure turbine blades using cooling ejection through planar slots with a pressure side cutback. The experimental test section consists of a generic scaled-up trailing edge model. The effects of different geometric configurations on the structure and the performance of the cooling-film are investigated in terms of film-cooling effectiveness, heat transfer coefficients, and discharge behavior. The interaction between an internal turbulator array of ribs with the ejection slot lip is of major interest. Different designs of the cooling ejection lip are applied. Four different ratios of lip thickness to ejection slot height (t/H = 0.2, 0.5, 1.0, 1.5) are investigated and three different lip contours representing typical manufacturing imperfections and wear. The experiments are performed at engine-realistic density ratios. The blowing ratios are varied between 0.2 < M < 1.25. The results show a strong dependency on the ejection lip thickness and only marginal changes when the lip shape is varied.

Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen Preise und Aborichtlinien Begell House Kontakt Language English 中文 Русский Português German French Spain