Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer

NATURAL CONVECTION IN A HORIZONTAL ANNULUS WITH AN INNER HEAT GENERATING SOLID SQUARE CYLINDER AND AN OUTER ISOTHERMAL CIRCULAR BOUNDARY

DOI: 10.1615/ICHMT.2008.CHT.540
20 pages

A. Shaija
Department of Mechanical Engineering, National Institute of Technology Calicut, Kerala -676001, India

G.S.V.L. Narasimham
Department of Mechanical Engineering, Indian Institute of Science, Bangalore 560012, India

Abstrakt

A numerical study of two-dimensional conjugate natural convection flow and heat transfer in a horizontal annulus, formed between an inner heat generating solid square cylinder placed concentrically inside an isothermal circular cylinder is performed. Numerical solutions of the Boussinesq equations and the solid energy equation in primitive variables are obtained on a non-staggered (collocated) grid with a pressure correction method. Results for the dimensionless maximum solid temperature, average solid temperature, average inner boundary temperature and average Nusselt number are obtained for the heat generation and outer radius based Grashof number ranging from 104 to 109, for solid-to-fluid thermal conductivity ratio of 1, 10, 50 and 100, and aspect ratio (ratio of the side of the inner square to the diameter of the outer cylinder) values of 0.2 and 0.4, with air as the working medium. The streamlines and isotherms have shown that refraction of isotherms occurs at the solid-fluid interface. The degree of refraction is found to be higher for higher thermal conductivity ratios. Since in the steady state, all the heat generated is to be transferred to the outer cold boundary irrespective of the thermal conductivity ratio, the average Nusselt number is not sensitive to the thermal conductivity ratio, while the local Nusselt numbers are found to be sensitive to solid-to-fluid thermal conductivity ratio. The maximum temperature depends upon the solid thermal conductivity and hence its determination requires the solution of the conjugate problem. The results are expected to be useful in the design of thermal systems such as the spent nuclear fuel casks and underground transmission cables.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH