Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer


DOI: 10.1615/ICHMT.2008.CHT.2030
25 pages

M. N. Islam
Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, Alberta T2N 1N4, Canada

Jalel Azaiez
Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Calgary, Alberta, Canada T2N1N4

Brij Maini


The viscous fingering of miscible flow displacements in a homogeneous porous media is examined in the case involving heat transfer between the fluids. The problem is formulated using continuity equation, Darcy's law, and volume-averaged forms of convection-diffusion equation for mass and energy balance. Full nonlinear simulations, using a pseudo-spectral method, allowed to analyze the mechanisms of fingering instability that result from the dependence of the fluids viscosities on both temperature and concentration. This dependence is represented by two dimensionless parameters; the solutal viscosity ratio; βC and the thermal viscosity ratio; βT. In particular, the study examined the effects of varying important parameters such as the Lewis number, the thermal lag coefficient and the thermal mobility ratio on the dynamics of the flow. The development of the new finger structures is analyzed by examining contours of the concentration and characterizing them qualitatively through a spectral analysis of the average concentration and an analysis of the variations of the mixing length and the relative contact area. It is found that diffusion of heat and its redistribution between the fluid and solid phases have a strong effect on the growth of the fingers. Furthermore, close and intricate interactions between the fluid and thermal fronts affect the subsequent development of the instability even in case where the two fronts are separated, with the thermal front lagging behind the fluid one.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH