Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer


DOI: 10.1615/ICHMT.2008.CHT.500
page 25

Leonid A. Dombrovsky
Joint Institute for High Temperatures, 17A Krasnokazarmennaya Str., Moscow, 111116, Russia; Tyumen State University, 6 Volodarsky Str., Tyumen, 625003, Russia

M. V. Davydov
Electrogorsk Research & Engineering Center on NPP Safety, Saint Constantine 6,142530, Electrogorsk, Moscow region, Russia

P. Kudinov
Division of Nuclear Power Safety, Royal Institute of Technology (KTH), Roslagstullbacken 21, Alba Nova, Stockholm 10691, Sweden


The paper is concerned with radiation heat transfer modeling in multi-phase disperse systems, which are formed in high temperature melt−coolant interactions. This problem is important for complex interaction of the core melt with water in the case of hypothetical severe accident in light water nuclear reactors. The non-local effects of thermal radiation due to semi-transparency of water in the visible and near infrared spectral ranges are taken into account by use of recently developed large-cell radiation model (LCRM) based on the spectral radiation energy balance for single computational cells. In contrast to the local approach for radiative heating of water by particles (OMM − opaque medium model), the LCRM includes radiative heat transfer between the particles of different temperatures. The regular integrated code VAPEX-P intended to model the premixing stage of FCI was employed for verification of LCRM in a realistic range of the problem parameters. A comparison with the OMM and more accurate P1 approximation showed that LCRM can be recommended for the engineering problem under consideration. The effects of temperature difference in solidifying particles are analyzed by use of the recently suggested approximation of transient temperature profile in the particles. It is shown that effect of the temperature difference on heat transfer from corium particles to ambient water is considerable and should not be ignored in the calculations. An advanced computational model based on LCRM for the radiation source function and subsequent integration of radiative transfer equation along the rays is also discussed in the paper.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH