Abo Bibliothek: Guest
ICHMT DL Home Aktuelles Jahr Archive Vorstand International Centre for Heat and Mass Transfer


DOI: 10.1615/ICHMT.2008.CHT.970
page 20

Mouldi Chrigui
Chair of Energy and Powerplant Technology, Department of Mechanical Engineering, Darmstadt University of Technology Petersenstr. 30, 64287 Darmstadt, Germany

A. Zghal
Laboratory of Mechanics, Solids, Structures and Technological Development, ESSTT, Tunisia

Amsini Sadiki
Institute of Energy and Power Plant Technology, Technische Universität Darmstadt, 64287 Darmstadt, Germany

Johannes Janicka
Institute of Energy and Power Plant Technology, TU Darmstadt, Jovanka-Bontschits-Strasse 2, 64287 Darmstadt, Germany; Darmstadt Graduate School of Excellence Energy Science and Engineering, TU Darmstadt, Jovanka-Bontschits-Strasse 2, 64287 Darmstadt, Germany


Two phase flow in the frame of the Eulerian-Lagrangian method were performed to study the dispersion and evaporation of N-heptane droplets. Simulations were carried out using two different 3D-codes based on the RANS approach for the continuous phase and a tracking algorithm for droplets. The evaporation is modeled using the Uniform Temperature Model, which is appropriated for small one-component hydrocarbon droplets. The interaction between the continuous phase and evaporating droplets is considered in fully two way coupling, i.e. mass transfer, heat transfer, momentum and turbulence. The configuration consists of two parts; within the first one, droplets are supposed to disperse and evaporate in the surrounding heated air phase. The impact of turbulence on the dispersed phase is modeled by the markov-sequence dispersion model using the time and spatial correlation functions. The key and novel point in this paper is the investigation of a poly-dispersed two phase flow of a volatile one-component hydrocarbon within operating conditions similar to industrial gas turbine conditions under consideration of the dispersed phase feedback on the properties of the continuous phase fluid dynamics. The results have shown good agreements between the experimental data and the numerical simulations. Further investigations for the evaporation of multi-component fuel are required.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH