Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 0.404 Factor de Impacto de 5 años: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2014007180
pages 643-657

ROBUST MODEL FOR PREDICTING THE AVERAGE FILM COOLING HEAT TRANSFER COEFFICIENT OVER A TURBINE BLADE BASED ON THE FINITE VOLUME STUDY

M. Payandehdoost
Mechanical Engineering Department, Faculty of Engineering, University of Guilan, Rasht 3756, Iran
Nima Amanifard
Mechanical Engineering Department, Faculty of Engineering, University of Guilan, Rasht, Iran
M. Naghashnejad
Mechanical Engineering Department, Faculty of Engineering, University of Guilan, Rasht 3756, Iran
H. M. Deylami
Faculty of Technology and Engineering, East of Guilan, University of Guilan, Rudsar, Iran

SINOPSIS

In this paper, a 2D numerical approach was implemented to analyze the effect of parameters on the compressible turbulent film cooling performed by slot injection over a VKI rotor blade. In this connection, the flow and thermal fields were evaluated using the blowing ratio, total temperature of a coolant jet, injection angle, and the location of injection slots on the blade surface. The computational domain with a hybrid mesh system could provide the required foundations for using the realizable k−ε turbulence model as well as the SIMPLE algorithm. Finally, the group method of data handling (GMDH)-type neural networks which were optimized by the genetic algorithms have been successfully used to present separate polynomial relations for the area-weighted average film cooling heat transfer coefficient. The effective geometrical and flow parameters were separately involved on the pressure and suction sides of the film cooled blade. The achieved polynomials demonstrate the remarkable reliability of modeling in prediction of the film cooling heat transfer coefficient in terms of minimum training and prediction errors.


Articles with similar content:

Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade
International Heat Transfer Conference 12, Vol.57, 2002, issue
M. Papa, Fabio Gori, Richard J. Goldstein
Experimental Study and Prediction of Film Cooling Effectiveness for a Guide Vane in Heavy Gas Turbine
International Heat Transfer Conference 15, Vol.23, 2014, issue
Liang Xu, Wei Wang, Jianmin Gao, Xiaojun Shi
NUMERICAL INVESTIGATION ON THE PERFORMANCE OF TRANSPIRATION COOLING COMBINED WITH FILM COOLING
International Heat Transfer Conference 16, Vol.10, 2018, issue
Fei He, Longsheng Tang , Rui Ding , Guangqi Dong , Jianhua Wang
CONTROL OF BOUNDARY LAYER TRANSITION OVER A FLAT PLATE USING DISCRETE HEATER STRIPS
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Hasan Gunes, Abdussamet Subasi
FILM COOLING PERFORMANCE IN A LOW-SPEED 1.5-STAGE TURBINE: EFFECTS OF BLOWING RATIO AND ROTATION
Journal of Enhanced Heat Transfer, Vol.18, 2011, issue 5
Guoqiang Xu, Jun Xiao , Guoqing Li , Xiang Luo , Zhi Tao, Hongwu Deng