Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 0.404 Factor de Impacto de 5 años: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018015455
pages 929-948

CONFINED IMPINGING LIQUID JET CHARACTERISTICS OF VAPOR CHAMBER EMBEDDED WITH HEAT SINKS

Paisarn Naphon
Department of Mechanical Engineering, Faculty of Engineering, Srinakharinwirot University, Thailand
Songkran Wiriyasart
Department of Mechanical Engineering, Faculty of Engineering, Srinakharinwirot University, Thailand

SINOPSIS

The experimental and numerical results of the study of the thermal resistance and fluid flow characteristics of a confined impinging liquid cooling vapor chamber are presented. Experiments are performed to verify the results predicted by the mathematical model. Effects of various parameters, heat source size, material of fin, channel width, and mass flow rate of the coolants on the cooling performance and thermal resistance characteristics are considered. A numerical analysis of a three-dimensional transient model of confined impinging has been carried out to evaluate the thermal and fluid-dynamic performances. By applying the mathematical modeling, the velocity and temperature distributions inside the vapor chamber are presented. Reasonable agreement is obtained between the measured data and the predicted results. These results are useful for the design to improve the thermal performance of the vapor chamber, and also diminished the expense and time of experiments.


Articles with similar content:

MULTIDIMENSIONAL SIMULATION OF THERMAL NONEQUILIBRIUM FLOWS IN A CONVERGENT-DIVERGENT NOZZLE
Multiphase Science and Technology, Vol.31, 2019, issue 1
Shivasubramanian Gopalakrishnan, Avick Sinha
A NUMERICAL STUDY ON THE EFFECTS OF THE HEAT SPREADER THICKNESS AND THE HEAT SINK SIZE ON THE THERMAL PERFORMANCE OF A COOLING DEVICE FOR A CPV MODULE
First Thermal and Fluids Engineering Summer Conference, Vol.7, 2015, issue
Tae Hoon Kim, Yong-Shik Han, Byung-ll Choi , Myung-Bae Kim, Kyu Hyung Do
ENERGY AND EXERGY ANALYSIS OF A DOUBLE STAGE HYBRID HEAT PUMP OPERATING WITH WATER AMMONIA
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2014, issue
Nahla Bouaziz, Ridha Ben Iffa, Dorra Lounissi
Evaluation of Herringbone Wavy Fin Based Heat Exchanger for Heat Transfer Enhancement in Automobile Exhaust Energy Harvesting Systems
International Heat Transfer Conference 15, Vol.23, 2014, issue
Srinath V. Ekkad, Jayati D. Athavale, Scott T. Huxtable, Jaideep Pandit
Multi-Objective Shape Optimisation of Natural Convection Cooled Plate-Fin Heat Sinks with Localised Heat Sources
Second Thermal and Fluids Engineering Conference, Vol.9, 2017, issue
Nicolas Baudin, R. Kempers, Sajad Alimohammadi, Tim Persoons