Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 1.199 Factor de Impacto de 5 años: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 51, 2020 Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v41.i7.50
pages 753-768

Investigation of Film-Cooled Rough Surfaces Using Large Eddy Simulation

Prasad Kalghatgi
Turbine Innovation and Energy Research (TIER) Center, College of Engineering, Louisiana State University Baton Rouge, LA 70803
Sumanta Acharya
Illinois Institute of Technology

SINOPSIS

In the present paper the effect of roughness on film cooling has been investigated numerically using Large Eddy Simulation (LES). A range of roughness parameters related to the momentum thickness of the crossflow boundary layer has been studied. A roughness element model is used for representing the microroughness over the film-cooled surfaces. Results for different roughness parameters are analyzed and compared with the baseline smooth case. Beyond 2 hole diameters of coolant injection, roughness is shown to reduce the cooling effectiveness.


Articles with similar content:

Investigation of Film Cooled Rough Surfaces using Large Eddy Simulation
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Sumanta Acharya, Prasad Kalghatgi
THE EFFECT OF COLD AIR JET INJECTION UPON THE FILM COOLING EFFECTIVENESS OF COMBUSTION CHAMBER WALLS FOR DIFFERENT INJECTION GEOMETRIES
International Heat Transfer Conference 7, Vol.6, 1982, issue
R. Best
Large-Eddy Simulations of trailing-edge cutback film cooling at low blowing ratio
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Hayder Schneider, Dominic von Terzi, Hans-Jorg Bauer
Experimental and Computational Film Cooling with Backward Injection for Cylindrical and Fan-Shaped Holes
International Heat Transfer Conference 15, Vol.20, 2014, issue
Shiou-Jiuan Li, Je-Chin Han, Wei-Hsiang Wang, Andrew F Chen
EXPERIMENTAL STUDY ON ARRANGEMENT EFFECTS OF INJECTION HOLES OF THE TURBINE BLADE LEADING EDGE ON THE FILM COOLING PERFORMANCE
International Heat Transfer Conference 13, Vol.0, 2006, issue
K.-S. Kim, Youn J. Kim