Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.137 SNIP: 0.341 CiteScore™: 0.43

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2016016017
pages 189-200

PROCESS OF FORMATION OF SPHEROIDAL GOLD PARTICLES AND OF NANOPHASES IN AlN−TiB2−TiSi2 COATINGS AFTER ANNEALING WITH SUBSEQUENT IMPLANTATION

Artem Demianenko
Sumy State University, Sumy, Ukraine
Katerina Smyrnova
Sumy State University, Sumy, Ukraine
Bahyt Zhollybekov
KaraKalpak State University, KaraKalpak, Uzbekistan
Anatoliy Kupchishin
Kharkiv Polytechnic University, Kharkiv, Ukraine
Yoshihiko Takeda
National Institute for Material Science, Japan
Hiroshi Amekura
National Institute for Material Science, Japan
Henryk Komsta
Institute of Transport, Combustion Engines and Ecology, Lublin University of Technology, Lublin, Poland
Marek Opielak
Institute of Transport, Combustion Engines and Ecology, Lublin University of Technology, 36, Nadbystrzycka Str., 20-618 Lublin, Poland
Konrad Kierczynski
Department of Electrical Devices and High Voltage Technology, Lublin University of Technology, Lublin, Poland

SINOPSIS

This paper presents new results on investigation of the influence of Au- negative ion beam implantation and thermal annealing at 900°C and 1300°C on the structure and characteristics of AlN−TiB2−TiSi2 coatings prepared by magnetron sputtering. Using a scanning electron microscope (SEM) with microanalysis (EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), the crystal structure, surface topography, and the microstructure were characterized.


Articles with similar content:

EFFECT OF THERMAL ANNEALING AND DEPOSITION CONDITIONS ON THE STRUCTURE AND MECHANICAL PROPERTIES OF A MULTILAYER NITRIDE COATING BASED ON Ta
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 1
Pawel Drodziel, Valeriy Loboda, Olga Maksakova, Yaroslav O. Kravchenko
MICROSTRUCTURE AND TRIBOLOGICAL PROPERTIES OF NITRIDE COATINGS BASED ON Zr, Ti, Cr, Nb, AND Si ELEMENTS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.21, 2017, issue 3
S. V. Plotnikov, A. I. Kupchishin, A. A. Bagdasaryan, Alexander D. Pogrebnjak, V. M. Beresnev, Yaroslav O. Kravchenko
AN INFLUENCE OF PLASMA TREATMENT ON STRUCTURE PROPERTIES OF THIN SiC FILMS ON Si
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 1-2
K. Kh. Nussupov, N. B. Beisenkhanov, Z. M. Amreyeva, Daniya M. Mukhamedshina, Z. B. Omarova, K. A. Mit'
EFFECT OF THICKNESS ON THE PROPERTIES OF SPUTTERED Ti THIN FILMS ON AA1100 FOR MEMS APPLICATION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 1
M. Ramu, S. Venkatesan
PARAMETERS OF CHEMICAL VAPOR DEPOSITION ON A STRUCTURE AND THE PROPERTIES OF NANOSTRUCTURED TaC COATING ON A CARBON COMPOSITE MATERIAL
Nanoscience and Technology: An International Journal, Vol.5, 2014, issue 3
K. Chuprunov, A. Yudin, V. N. Anikin, Denis Leybo, S. A. Eremin, I. N. Burmistrov, D. V. Kuznetsov