Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v10.i3.10
pages 327-364

LASER HYBRID PLASMA SPRAY PROCESSES: TOOLS TO ADJUST COATING STRUCTURAL CHARACTERISTICS

Sophie Costil
LERMPS, Technological University of Belfort- Montbéliard, site de Sévenans, 90010 Belfort Cedex France
Ghislain Montavon
LERMPS laboratory, University of Technology of Belfort‐Montbéliard
Hanlin Liao
LERMPS, Technological University of Belfort- Montbéliard, site de Sévenans, 90010 Belfort Cedex France
Christian Coddet
LERMPS, Université de Technologie de Belfort-Montbéliard, site de Sévenans, 90 010 Belfort Cedex

SINOPSIS

Five groups of closely interrelated operating parameters (power parameters, feedstock injection parameters, geometric parameters, kinematics parameters and environmental parameters) have to be optimized and controlled during Atmospheric Plasma Spraying (APS) to control the coating structure and its properties in service. Nevertheless, in some cases, the multiple possible combinations of operating parameters do not permit to reach the required coating structural characteristics.
Auxiliary systems, such as lasers, can help to decouple interrelated effects and introduce new degrees of freedom to the process. Combining a plasma torch with a laser beam forms a hybrid process. In such a case, several strategies can be implemented, depending on the one hand on the laser irradiation characteristics and, on the other hand, on the location of the laser irradiation area in regards with the particle impact footprint on the surface. This paper intends to develop several works carry out on laser hybrid plasma spray processes. Substrate surface and coating interface ablation, substrate surface and coating layers preheating and coating layers remelting are presented. Mechanisms resulting from laser irradiation are detailed and some resulting coating structures analyzed.


Articles with similar content:

A GENERAL AND NEW KINETIC MODEL OF COAL DEVOLATILIZATION
International Journal of Energy for a Clean Environment, Vol.5, 2004, issue 3
T. Faravelli, E. Ranzi, E. Parodi, G. Migliavacca, Loretta Bonfanti, S. Pierucci
ON THE POSSIBILITY OF LASER COOLING OF MOLECULAR IODINE
Telecommunications and Radio Engineering, Vol.75, 2016, issue 5
Yu. P. Machekhin, L. S. Khorolets
Multiple-Beam Materials Processing
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.4, 2000, issue 2
Elijah Kannatey-Asibu, Jr.
RECENT DEVELOPMENTS IN THERMAL SPRAYING FOR IMPROVED COATING CHARACTERISTICS AND NEW APPLICATIONS/ PROCESS CONTROLS AND SPRAY PROCESSES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 1
Ghislain Montavon
ON SIMULATING PRIMARY ATOMIZATION
Atomization and Sprays, Vol.23, 2013, issue 11
Marcus Herrmann