Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2015015731
pages 77-84

WIDE-APERTURE ELECTRON SOURCE WITH A PLASMA GRID EMITTER

T. V. Koval
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia
M. S. Vorobyov
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia
Bao Hung Nguyen
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia

SINOPSIS

This paper presents a theoretical and experimental investigation of the formation and transport of a large cross-section beam in a low-pressure gas, the discharge plasma characteristics in an electron source with a plasma emitter and beam extraction into the atmosphere through a thin foil. In such a source, the electron beam is a superposition of elementary beams formed by separate emission structures, the plasma boundary of which is stabilized by a fine metal grid. In experiments at an accelerating voltage of 200 kV, emission current of 16 A, and pulse duration of 40 μs, about 4 kW of the beam average power is extracted from the accelerating gap into the atmosphere at the geometric transparency of a supporting grid of the exit foil window equal to 56%. Numerical investigation of the discharge plasma generation, formation and transport of an electron beam also is carried out. It is shown that the characteristics of the discharge plasma depend on the resistance in the hollow anode circuit of the discharge system and on the mask surface area. The main beam current losses are associated with the expansion of the elementary electron beams cross section in the accelerating gap, plasma flowing-in behind the mask, ion current, and losses on the foil.


Articles with similar content:

PLASMA-CATHODE ELECTRON SOURCE BASED ON A LOW-PRESSURE ARC DISCHARGE IN THE MODE OF THE EMISSION CURRENT ENHANCEMENT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 1
Vladimir N. Devyatkov, Bao Hung Nguyen, T. V. Koval, Vladimir V. Uglov
EQUIPMENT FOR PULSED THERMAL TREATMENT OF THE SURFACES OF MATERIALS BY A LOW-ENERGY ELECTRON BEAM
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 2-3
A. D. Teresov, Vladimir N. Devyatkov, Nikolay N. Koval, S. V. Grigoriev
MODELING OF FLUID, THERMAL AND ELECTRIC QUANTITIES CHARACTERIZING A WATER-SWIRL STABILIZED ELECTRIC ARC
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
Jiri Jenista
The Diode Slit L-Cathode Electron Gun
Telecommunications and Radio Engineering, Vol.66, 2007, issue 1
Ye. V. Belousov, A. V. Nesterenko, V. V. Zavertanniy
A Laser-Based Polarization Interferometer for Plasma Diagnostics at Submillimeter Wavelength
Telecommunications and Radio Engineering, Vol.51, 1997, issue 10
V. K. Kononenko, Ye. M. Kuleshov, V. K. Kiseliov, P. K. Nesterov, B. N. Knyaz'kov, M. S. Yanovsky, Yu. Ye. Kamenev