High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publicado 4 números por año
ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
MOLTEN SALT PREPARATION OF LEAD ZIRCONATE TITANATE PbZrxTi1-xO3, POWDER AND CERAMIC CHARACTERIZATION OF THE COMPOSITION x = 0.5
Volumen 5,
Edición 4, 2001,
18 pages
DOI: 10.1615/HighTempMatProc.v5.i4.110
SINOPSIS
A preparation procedure of lead zirconate-titanate PbZrxTi1-хO3 is deduced from the investigation of the reactivity of РЬ(NО3)2 and of the zirconium-titanium mixed oxide ZrxTi1-хO2 (0.4 Ј x Ј 0.6) with molten alkali-metal nitrites. For the composition (x = 0.5), the obtained powders and ceramic bodies are characterized and some physical properties are considered.
658 Vistas de artículos
12 Descargas de artículos
Métrica
Artículos con contenido similar:
Último edicion
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Próximos Artículos
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products