Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v9.i3.70
pages 401-413

MACROCRACK FORMATION IN PLASMA-SPRAYED YSZ TBCS WHEN SPRAYING THICK PASSES

A. Tricoire
SPCTS, 123 avenue Albert Thomas, 87060 Limoges cedex, France
Michel Vardelle
LMCTS-URA 320, University of Limoges, 123 Avenue Albert Thomas -87060 Limoges Cedex - France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
F. Braillard
SNECMA Services, ZI Nord, 1 rue Maryse Bastie, BP 129, 86101 Chatellerault cedex, France
A. Malie
SNECMA Services, ZI Nord, 1 rue Maryse Bastie, BP 129, 86101 Chatellerault cedex, France
P. Bengtsson
SNECMA Moteurs, RN 7, BP 81, 91003 Evry cedex, France

SINOPSIS

The aim of this work is to study the formation of macrocracks orthogonal to the substrate in yttria-stabilised zirconia coatings, deposited in one or two thick passes (more than a hundred urn each), by a direct current (DC) plasma torch. Zirconia was air plasma sprayed on Hastelloy X substrates, with a NiCrAlY bond coat. The different parameters, which control this phenomenon, are considered through a statistical approach. A special attention is devoted to the quenching stress during deposition. A particular resulting microstructure with columnar zirconia grains is presented. A search of the most influent spray parameters has also been conducted.


Articles with similar content:

STUDY OF DROPLET BEHAVIOUR AT IMPACT IN PLASMA SPRAYING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 3
Michel Vardelle, J. Cedelle, Bernard Pateyron, Pierre Fauchais
PREPARATION OF INSULATING REFRACTORY MATERIALS BY PLASMA SPRAY TECHNOLOGY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 3
Vitas Valincius, Vilma Snapkauskiene, Viktorija Valinciute, Vladas Mecius, Romualdas Kerzelis
Suspension plasma spraying for powder preparation
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
Etienne Bouyer, Nicolas Dignard, Maher I. Boulos, Francois Gitzhofer, Matthias Muller
HIGH-ENTROPY TITANIUM-ALUMINUM DIFFUSION COATINGS ON NICKEL ALLOY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 3
T. V. Loskutova, T. P. Hovorun, O. E. Datsyuk, V. G. Khyzhniak, N. A. Kharchenko, I. S. Pohrebova, A. I. Dehula, Yaroslav O. Kravchenko, I. Ya. Smokovich
MICROSTRUCTURE-PROPERTY RELATIONSHIPS OF AIR PLASMA-SPRAYED TiO2 COATINGS
Progress in Plasma Processing of Materials, 2003, Vol.0, 2003, issue
N. Branland, Maher I. Boulos, Erick Meillot, Francois Gitzhofer, Pierre Fauchais, Armelle Vardelle