Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v9.i3.80
pages 415-429

DIAGNOSTICS OF TWO PLASMA JET FLOWS CLOSE TO A CARBON PHENOLIC COMPOSITE TARGET USING MOLECULAR EMISSION SPECTROSCOPY

Sebastien Bansard
SPCTS, University of Limoges, 123, Av Albert Thomas, 87060 Limoges, France
E. Legros
Laboratoire Sciences des Procédés Céramiques et Traitements de Surface ENSIL, 16 Rue d'Atlantis, 87068 Limoges, France
Michel Vardelle
LMCTS-URA 320, University of Limoges, 123 Avenue Albert Thomas -87060 Limoges Cedex - France
Armelle Vardelle
ENSIL, ESTER Technopole, 87068 Limoges - France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
Herve Rabat
LASEP : Laboratoire d'Analyse Spectroscopique et d'Energétique des PLasmas, UPRES-EA 3269 Faculté des Sciences, Site de Bourges, Université d'Orléans, rue Gaston Berger, BP 4043, 18028 Bourges Cedex France
Charles de Izarra
LASEP (Laboratoire d'Analyse Spectroscopique et d'Energetique des Plasmas), UFR-Faculte des Sciences, Antenne de BOURGES, Universite d'ORLEANS, rue Gaston Berger, BP 4043, 18028 BOURGES CEDEX, FRANCE

SINOPSIS

An experimental set up has been developed to characterize and measure the thermo-mechanical ablation of a carbon/phenolic composite under the impact of liquid alumina particles. It combines two direct current plasma torches. The present work is focused on temperature measurements around a target located in front of the two plasma flows. The temperature determination method has been developed by LASEP laboratory and is based on the analysis of unresolved groups of UV OH lines. The rotational temperature range is 2000K-8000K. Low temperatures values are compared with the location of melting points of alumina and tungsten rods set in the plasma flow. Surface temperatures of the target are obtained by using optical pyrometry. This work allows to validate a numerical model of the two plasma jet flows impacting the target.


Articles with similar content:

EXPERIMENTAL SIMULATION OF THERMO-MECHANICAL ABLATION OF CARBON/PHENOLIC COMPOSITE UNDER THE IMPACT OF LIQUID ALUMINA PARTICLES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 3
Michel Vardelle, J. M. Deoclezian, Sebastien Bansard, S. Plouvier, Pierre Fauchais
NUMERICAL SIMULATION OF COATING DEPOSITION IN A THERMAL SPRAY PROCESS
International Heat Transfer Conference 13, Vol.0, 2006, issue
Sanjeev Chandra, M. Xue
INVESTIGATION ON SUPERSONIC GAS FLOW COUPLED WITH AN INDUCTIVE LOW-PRESSURE PLASMA USED FOR THE SYNTHESIS OF SOFC MATERIAL
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.8, 2004, issue 3
M. Nikravech, Jacques Amouroux, Daniel Morvan, E. Francke, F. Rousseau, J. Milpied
GENERATION OF A LOW-TEMPERATURE PLASMA OF ARC DISCHARGE AND ITS USE FOR MODIFYING THE SURFACES OF MATERIALS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 3-4
E. A. Petrikova, Nikolay N. Koval, V. V. Shugurov, I. V. Lopatin, Olga V. Krysina, S. S. Kovalskyy
2D MODELING OF LOW PRESSURE AIR PLASMA REACTOR
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.11, 2007, issue 2
Jacques Amouroux, P. Miquel, S. Cavadias, C. Guyon