Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v8.i4.90
pages 599-603

MEASUREMENT OF THE EROSION OF THE PLASMATRON CATHODE

E. I. Asinovsky
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia
E. Kh. Isakaev
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint, Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia
P.P. Ivanov
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia
A. L. Ochkan'
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia
I. S. Samoylov
Science and Engineering Center for Energy-Efficient Processes and Equipment of Joint Institute for High Temperatures of Russian Academy of Sciences Izhorskaya 13/19, Moscow, 127412, Russia
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

SINOPSIS

A method is proposed for the erosion measurement of the tungsten cathode of industrial plasmatrons. The method uses micro-photo shooting of the working surface of the cathode at small depth of field (10 μ) of the optical device. A series of snapshots made under controllable displacement of the cathode along its axis relatively to the microscope lens allows drawing a topographical picture of the working surface. Comparing cathode topograms resulting from a series of consecutive tests the spatial picture of the change of a working surface due to the erosion of the cathode can be registered. The accuracy of the method depends on the choice of microscope objective providing the magnification and consequently the depth of field of the image. If the working surface of the cathode, 2 mm in diameter, fits the microscope image, the accuracy of measurement of the elementary volume of a surface change makes about 1000 cubic microns, resulting for the tungsten to 2e-11 kg. Using the method under consideration the cathode erosion features and intensity were determined through a series of consecutive one hour long tests at 350 A. At the cathode surface two specific zones were observed corresponding to different mechanisms of erosion; one is eroded mainly by the evaporation of the metal while the other suffer from the ablation of large fragments.


Articles with similar content:

CORONA DISCHARGE MICROJETS AS POSSIBLE ACTUATORS FOR JET NOISE CONTROL
TsAGI Science Journal, Vol.41, 2010, issue 1
N. N. Ostrikov, Victor F. Kopiev
Radiation 1
International Heat Transfer Conference 5, Vol.12, 1974, issue
F. R. Steward
ON THE INTEGRAL TRANSFORM SOLUTION OF THE HEAT DIFFUSION EQUATION IN A SLAB WITH RADIANT FLUX AT THE OUTER SURFACE
ICHMT DIGITAL LIBRARY ONLINE, Vol.3, 1997, issue
C. M. Hackenberg, A. G. Oliveira Filho
VELOCITY OF PLASMA AND PARTICLES IN OXYGEN-HYDROGEN THERMAL PLASMA JET
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Milan Hrabovsky, M. Konrad, Vladimir Kopecky
METAL SURFACE MODIFICATION BY A NANOSECOND DIFFUSE DISCHARGE IN NITROGEN
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 1
Victor Tarasenko, M. Erofeev, M. Shulepov