Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal for Multiscale Computational Engineering
Factor de Impacto: 1.016 Factor de Impacto de 5 años: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN Imprimir: 1543-1649
ISSN En Línea: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v5.i3-4.30
pages 181-202

Chemical Complexity in Mechanical Deformation of Metals

Dipanjan Sen
Department of Materials Science and Engineering; and Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
Markus J. Buehler
Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA

SINOPSIS

Prediction of the deformation behavior of metals in the presence of environmentally embrittling species like water or hydrogen, or under presence of organic reactive chemicals, remains a critical challenge in materials modeling. Here we propose a combination of the first principles-based reactive force field ReaxFF and the embedded atom method (EAM) in a generic multi-scale modeling framework, the Computational Materials Design Facility (CMDF), that enables the treatment of large reactive metallic systems within a classical molecular dynamics framework. Our hybrid method is based on coupling multiple Hamiltonians by weighting functions, which allows accurate modeling of chemically active sites with the reactive force field, while other parts of the system are described with the computationally less expensive EAM potential. We apply our hybrid modeling scheme in a study of fracture of a nickel single crystal under the presence of oxygen molecules. We observe that the oxide formed on the crack surface produces numerous defects surrounding the crack, including dislocations, grain boundaries, and point defects. We show that the mode of crack propagation changes from brittle crack opening at the crack tip to void formation ahead of the crack and void coalescence for lll orientation of the crack. Our results illustrate the significance of considering oxidative processes in studying deformation of metals, an aspect largely neglected in most modeling work carried out with pure EAM potentials. Our hybrid method constitutes an alternative to existing methods that are based on coupling quantum mechanical methods, such as density functional theory, to empirical potentials.


Articles with similar content:

CONCURRENT ATOMISTIC-CONTINUUM MODEL FOR DEVELOPING SELF-CONSISTENT ELASTIC CONSTITUTIVE MODELING OF CRYSTALLINE SOLIDS WITH CRACKS
International Journal for Multiscale Computational Engineering, Vol.15, 2017, issue 2
Somnath Ghosh, Subhendu Chakraborty, Jiaxi Zhang
ANALYSIS OF THE QUASI-NONLOCAL QUASICONTINUUM APPROXIMATION OF THE EMBEDDED ATOM MODEL
International Journal for Multiscale Computational Engineering, Vol.10, 2012, issue 1
Mitchell Luskin, Xingjie Helen Li
MODELING AERODYNAMIC BREAKUP OF LIQUID DROPS IN A GAS FLOW WITH MOLECULAR DYNAMICS ANALOGY METHODS
Second Thermal and Fluids Engineering Conference, Vol.46, 2017, issue
Flint Pierce, Alexander L. Brown
Determination of the Material Intrinsic Length Scale of Gradient Plasticity Theory
International Journal for Multiscale Computational Engineering, Vol.2, 2004, issue 3
Rashid K. Abu Al-Rub, George Voyiadjis
MULTILEVEL MODELS OF POLYCRYSTALLINE METALS: COMPARISON OF RELATIONS DESCRIBING THE CRYSTALLITE LATTICE ROTATIONS
Nanoscience and Technology: An International Journal, Vol.10, 2019, issue 1
Alexey I. Shveykin, Peter V. Trusov