Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Atomization and Sprays
Factor de Impacto: 1.262 Factor de Impacto de 5 años: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684

Volumes:
Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v19.i1.20
pages 19-39

NEWTONIAN AND NON-NEWTONIAN SPRAY INTERACTION WITH A HIGH-SPEED MOVING SURFACE

Daniel M. Dressler
Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, British Columbia, V6T1Z4, Canada
Larry Li
Sheldon I. Green
Department of Mechanical Engineering, University of British Columbia, 3321−2260 West Mall, Vancouver, British Columbia, V6T1Z4, Canada
Martin H. Davy
Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, British Columbia, V6T1Z4, Canada
Donald T. Eadie
Kelsan Technologies Corporation, 1140 West 15th Street, North Vancouver, British Columbia, V7P 1M9, Canada

SINOPSIS

Motivated by the need to improve spray coating transfer efficiencies, results are presented from an experimental investigation into the interaction between an air-blast spray and a high-speed moving surface. Three model elastic liquids of varying polymer molecular weight and three inelastic liquids of varying shear viscosity were used to isolate the effect of elasticity and shear viscosity, respectively, on spray impaction behavior. In addition, an industrial liquid friction modifier, KELTRACKTM , for use in the railroad industry, was included in the spray tests. High-speed photography was used to examine spray impingement. Ligaments, formed as a consequence of a liquid's viscoelasticity, were observed impacting the surface for the higher molecular weight elastic liquids. The effect of increasing elasticity was shown to increase spray coating transfer efficiencies; this is attributed to a larger proportion of the sprayed liquid reaching the target surface as well as an increased splash threshold on impact. Observations and recommendations were stated regarding transfer efficiency improvement considerations.


Articles with similar content:

LIQUID PROPERTY AND NOZZLE EFFECTS ON FLIGHT TIME OF PULSED JET SPRAY
Atomization and Sprays, Vol.14, 2004, issue 2
D. C. Slaughter, Daniel Downey, D. Ken Giles
Investigation of thick polymer film promoting dropwise condensation mode on dropwise and film coexisting surfaces
International Heat Transfer Conference 12, Vol.44, 2002, issue
Xiao-Bo Zhu, Dunqi Xu, Jia-Ming An, Jia-Bin Chen, Xuehu Ma, Jifang Lin
ANALYSIS OF VARIANTS WITHIN DIFFERENT MODELS OF DIESEL OIL VOLATILIZATION PROCESS USING VARIOUS SOIL MATERIALS
Special Topics & Reviews in Porous Media: An International Journal, Vol.6, 2015, issue 3
Ehab Hussein Bani-Hani, Khalil Khanafer, Fadi Al-Khatib
COMPARISON OF WATER-IN-OIL EMULSION ATOMIZATION CHARACTERISTICS FOR LOW- AND HIGH-CAPACITY PRESSURE-SWIRL NOZZLES
Atomization and Sprays, Vol.21, 2011, issue 5
Vincent G. McDonell, Christopher D. Bolszo, William A. Sirignano, Adrian A. Narvaez, Derek Dunn-Rankin
VISCOSITY AND SURFACE TENSION EFFECTS IN PRESSURE SWIRL ATOMIZATION
Atomization and Sprays, Vol.5, 1995, issue 3
V. Dorfner, Joachim Domnick, Franz Durst, R. Kohler