Publicado 12 números por año
ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684
Indexed in
EFFERVESCENT ATOMIZER OPERATION AND SPRAY CHARACTERISTICS
SINOPSIS
An experimental study was conducted to examine the performance of a plain-orifice, twin-fluid atomizer that urns designed to produce effervescent atomization at low air/liquid ratios. The liquid employed was water and the atomizing gas was air. The parameters varied were the air/liquid mass ratio (ALR) and the atomizer operating pressure. Studies of spray characteristics included measurements of Sauter mean diameter (SMD), drop size distribution, and radial liquid distribution of the liquid mass within the spray.
It was found that SMD decreases with an increase in either ALR or operating pressure. The effect of ALR on SMD diminishes as the value of ALR increases. Changes in operating pressure and ALR have little effect on the Rosin-Rammler drop size distribution parameter. Measurements of radial liquid distribution showed a significantly larger spray cone angle than those produced by conventional plain-orifice pressure atomizers.
-
Li Zhouhang, Wu Yuxin, Cai Chunrong, Zhang Hai, Gong Yingli, Takeno Keiji, Hashiguchi Kazuaki, Lu Junfu, Mixing and atomization characteristics in an internal-mixing twin-fluid atomizer, Fuel, 97, 2012. Crossref
-
Lefebvre Arthur H., Some Recent Developments in Twin-Fluid Atomization, Particle & Particle Systems Characterization, 13, 3, 1996. Crossref
-
Qian Lijuan, Lin Jianzhong, Xiong Hongbin, A Fitting Formula for Predicting Droplet Mean Diameter for Various Liquid in Effervescent Atomization Spray, Journal of Thermal Spray Technology, 19, 3, 2010. Crossref
-
Rahman Mohammad A, Heidrick Ted, Fleck Brian A, Correlations between the two-phase gas/liquid spray atomization and the Stokes/aerodynamic Weber numbers, Journal of Physics: Conference Series, 147, 2009. Crossref
-
Gadgil Hrishikesh P., Raghunandan B. N., Some features of spray breakup in effervescent atomizers, Experiments in Fluids, 50, 2, 2011. Crossref
-
Hong Moongeun, Fleck Brian A., Nobes David S., Unsteadiness of the internal flow in an effervescent atomizer nozzle, Experiments in Fluids, 55, 12, 2014. Crossref
-
WANG Muh-Rong, LIN Tien-Chu, LAI Teng-San, TSENG Ing-Ren, Atomization Performance of an Atomizer with Internal Impingement, JSME International Journal Series B, 48, 4, 2005. Crossref
-
Al Rabadi S., Friedel L., Al Salaymeh A., Mean Droplet Size and Local Velocity in Horizontal Isothermal Free Jets of Air and Water, respectively, Viscous Liquid in Quiescent Ambient Air, Chemical Engineering & Technology, 30, 1, 2007. Crossref
-
Mandel Frederick, McHugh Mark, Don Wang J, Supercritical Fluid Processing of Polymeric Materials, in Supercritical Fluid Technology in Materials Science and Engineering, 2002. Crossref
-
Sovani S.D, Sojka P.E, Lefebvre A.H, Effervescent atomization, Progress in Energy and Combustion Science, 27, 4, 2001. Crossref
-
Gadgil Hrishikesh P., Raghunandan B. N., Model for Predicting the Mean Drop Size in Effervescent Sprays, Journal of Propulsion and Power, 27, 5, 2011. Crossref
-
Gadgil Hrishikesh P., Raghunandan B. N., Effect of Air Injection Configuration on the Characteristics of Effervescent Sprays, Journal of Propulsion and Power, 27, 4, 2011. Crossref
-
Tafreshi Z.M, Kirpalani D, Bennett A, McCracken T.W, Improving the efficiency of fluid cokers by altering two-phase feed characteristics, Powder Technology, 125, 2-3, 2002. Crossref
-
Sutherland J.J., Sojka P.E., Plesniak M.W., Entrainment by ligament-controlled effervescent atomizer-produced sprays, International Journal of Multiphase Flow, 23, 5, 1997. Crossref
-
Lian-sheng Liu, Hua Yang, Xiang Gou, Runze Duan, Yan Yuan, Experimental Investigations on the Spray Combustion Produced by Effervescent Atomizers, 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring, 2012. Crossref
-
Mandel Frederick S., Don Wang J., Manufacturing of specialty materials in supercritical fluid carbon dioxide, Inorganica Chimica Acta, 294, 2, 1999. Crossref
-
Lin Jianzhong, Qian Lijuan, Xiong Hongbin, Chan Tat Leung, Effects of operating conditions on droplet deposition onto surface of atomization impinging spray, Surface and Coatings Technology, 203, 12, 2009. Crossref
-
Donbar Jeffrey M., Gruber Mark R., Jackson Thomas A., Carter Campbell D., Mathur Tarun, Oh planar laser-induced fluoroescence imaging in a hydrocarbon-fueled scramjet combustor, Proceedings of the Combustion Institute, 28, 1, 2000. Crossref
-
Qian LiJuan, Lin JianZhong, Modeling on effervescent atomization: A review, Science China Physics, Mechanics and Astronomy, 54, 12, 2011. Crossref
-
Lin Jianzhong, Qian Lijuan, Xiong Hongbin, Relationship between deposition properties and operating parameters for droplet onto surface in the atomization impinging spray, Powder Technology, 191, 3, 2009. Crossref
-
Li Zhouhang, Wu Yuxin, Yang Hairui, Cai Chunrong, Zhang Hai, Hashiguchi Kazuaki, Takeno Keiji, Lu Junfu, Effect of liquid viscosity on atomization in an internal-mixing twin-fluid atomizer, Fuel, 103, 2013. Crossref
-
Jagannathan T.K., Nagarajan R., Ramamurthi K., Effect of ultrasound on bubble breakup within the mixing chamber of an effervescent atomizer, Chemical Engineering and Processing: Process Intensification, 50, 3, 2011. Crossref
-
Mlkvik Marek, Zaremba Matous, Jedelsky Jan, Jicha Miroslav, Dančová P., Veselý M., Comparison of Y-jet and OIL effervescent atomizers based on internal and external two-phase flow characteristics, EPJ Web of Conferences, 114, 2016. Crossref
-
Lin K.-C., Kennedy P., Spray penetration heights of angle-injected aerated-liquid jets in supersonic crossflows, 38th Aerospace Sciences Meeting and Exhibit, 2000. Crossref
-
Ballal Dilip, Gupta Ashwani, Arthur H. Lefebvre (1923-2003)-A Tribute, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004. Crossref
-
Fuel Injection, in Gas Turbine Combustion, 2010. Crossref
-
Mahrukh Mahrukh, Kumar Arvind, Gu Sai, Effects of angular injection, and effervescent atomization on high-velocity suspension flame spray process, Surface and Coatings Technology, 302, 2016. Crossref
-
Poozesh Sadegh, Akafuah Nelson, Saito Kozo, Effects of automotive paint spray technology on the paint transfer efficiency – a review, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232, 2, 2018. Crossref
-
Peltier Scott J., Lin Kuo-Cheng, Carter Campbell D., Kastengren Alan L., Characterization of the external and internal flow structure of an aerated-liquid injector using X-ray radiography and fluorescence, Experiments in Fluids, 58, 9, 2017. Crossref
-
Jadidi Mehdi, Vardelle Armelle, Dolatabadi Ali, Moreau Christian, Heat Transfer in Suspension Plasma Spraying, in Handbook of Thermal Science and Engineering, 2017. Crossref
-
Jadidi Mehdi, Vardelle Armelle, Dolatabadi Ali, Moreau Christian, Heat Transfer in Suspension Plasma Spraying, in Handbook of Thermal Science and Engineering, 2018. Crossref
-
Nair Prapanch, Tomar Gaurav, Simulations of gas-liquid compressible-incompressible systems using SPH, Computers & Fluids, 179, 2019. Crossref
-
Jedelský Jan, Zaremba Matouš, Malý Milan, Jícha Miroslav, Vít Tomáš, Dančová Petra, Novotný Petr, Characteristics of droplet motion in effervescent sprays, EPJ Web of Conferences, 67, 2014. Crossref
-
Rajamanickam Kuppuraj, Roy Swapneel, Basu Saptarshi, Novel Fuel Injection Systems for High-Speed Combustors, in Droplets and Sprays, 2018. Crossref
-
Chin J. S., Lefebvre A. H., A Design Procedure for Effervescent Atomizers, Journal of Engineering for Gas Turbines and Power, 117, 2, 1995. Crossref
-
Omer K., Ashgriz N., Spray Nozzles, in Handbook of Atomization and Sprays, 2011. Crossref
-
Lee Wongu, Hwang Donghyun, Ahn Kyubok, Yoon Youngbin, Spray Characteristics of Effervescent Swirl Injectors for Variable Thrust, Journal of the Korean Society of Propulsion Engineers, 23, 2, 2019. Crossref
-
Mahrukh Mahrukh, Kumar Arvind, Nabavi Seyed Ali, Gu Sai, Sher Ilai, Numerical Analysis of the Effects of Using Effervescent Atomization on Solution Precursor Thermal Spraying Process, Industrial & Engineering Chemistry Research, 56, 48, 2017. Crossref
-
Chakraborty Mayukhmali, Vaidyanathan Aravind, Desikan S. L. N., Experiments on atomization and spray characteristics of an effervescent strut injector, Physics of Fluids, 33, 1, 2021. Crossref
-
Lin K.-C., Kirkendall K., Kennedy P., Jackson T., Spray structures of aerated liquid fuel jets in supersonic crossflows, 35th Joint Propulsion Conference and Exhibit, 1999. Crossref
-
Mostafa Abdu, Fouad M., Enayet M., Osman S., Measurements of Spray Characteristics Produced by Effervescent Atomizers, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004. Crossref
-
Hammad Farid A., Sun Kai, Che Zhizhao, Jedelsky Jan, Wang Tianyou, Internal two-phase flow and spray characteristics of outside-in-liquid twin-fluid atomizers, Applied Thermal Engineering, 187, 2021. Crossref
-
Czernek Krystian, Hyrycz Michał, Krupińska Andżelika, Matuszak Magdalena, Ochowiak Marek, Witczak Stanisław, Włodarczak Sylwia, State-of-the-Art Review of Effervescent-Swirl Atomizers, Energies, 14, 10, 2021. Crossref
-
Mahrukh Mahrukh, Kumar Arvind, Gu Sai, Experimental Study of the Effects of Using Different Precursor Concentrations, Solvent Types, and Injection Types on Solution Precursor High-Velocity Oxygen Fuel (HVOF) Nanostructured Coating Formation, Industrial & Engineering Chemistry Research, 56, 17, 2017. Crossref
-
Shariatnia Shadi, Asadi Amir, Jarrahbashi Dorrin, Experimental analysis of supercritical-assisted atomization, Physics of Fluids, 33, 1, 2021. Crossref
-
Li Genbao, Li Chuqiao, Experimental study on the spray steadiness of an internal-mixing twin-fluid atomizer, Energy, 226, 2021. Crossref
-
Kourmatzis A., Lowe A., Masri A. R., Conditioned Analysis of Effervescent Atomization, Journal of Energy Engineering, 143, 5, 2017. Crossref
-
Mlkvik M., Stähle P., Schuchmann H.P., Gaukel V., Jedelsky J., Jicha M., Twin-fluid atomization of viscous liquids: The effect of atomizer construction on breakup process, spray stability and droplet size, International Journal of Multiphase Flow, 77, 2015. Crossref
-
Ochowiak M., The experimental study on the viscosity effect on the discharge coefficient for effervescent atomizers, Experimental Thermal and Fluid Science, 50, 2013. Crossref
-
Jedelský Jan, Jícha Miroslav, Spray characteristics and liquid distribution of multi-hole effervescent atomisers for industrial burners, Applied Thermal Engineering, 96, 2016. Crossref