Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Atomization and Sprays
Factor de Impacto: 1.262 Factor de Impacto de 5 años: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684

Volumes:
Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020419
pages 691-706

INFLUENCE OF PIEZO-DRIVEN SYNTHETIC JET ON WATER SPRAY BEHAVIOR

Matteo Chiatto
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy
Luca Marchitto
Istituto Motori-CNR
G. Valentino
IstitutoMotori, CNR, Naples, 80125, Italy
Luigi de Luca
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy

SINOPSIS

The opportunity of directly managing the spray formation and its characteristics has gained much interest in the last few years, due to the various active flow control methods available nowadays. In this work particle image velocimetry (PIV) has been applied to investigate the effect of a piezo-driven synthetic jet (SJ) on the droplet velocity distribution of a water spray. Tests were carried out under atmospheric conditions within a chamber test rig, equipped with optical accesses, at two injection pressures, namely, 5 and 10 MPa, exploring the variation of the spray flow field caused by the synthetic jet perturbations. The SJ orifice axis has been placed 45 deg tilted with respect to the water spray axis, and the nozzle body has been moved along its own axis for three different positions. PIV measurements have been averaged on 300 trials. For each operation condition, the actual influence region of the SJ has been evaluated through a T-test algorithm. The synthetic jet locally interacts with the spray, remarkably energizing the region downstream of the impact. The effectiveness of the actuator decreases for higher injection pressures and shorter distances between spray nozzle and SJ orifice. The study has been corroborated by a vorticity field analysis, which is able to identify the influence of coherent vortex structures generated by the air jet, in terms of both droplet momentum and droplet spreading variations.


Articles with similar content:

INVESTIGATIONS OF COMMON-RAIL FUEL INJECTION TECHNIQUE IN DI-DIESEL-ENGINES
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Franz Mayinger, B. Ofner, S. Eisen
EFFECTS OF CANTED INJECTION ANGLES ON THE SPRAY CHARACTERISTICS OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.20, 2010, issue 9
Jinkwan Song, Min-Ki Kim, Jeongjae Hwang, Youngbin Yoon
EFFECT OF THE LIQUID INJECTION ANGLE ON THE ATOMIZATION OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.24, 2014, issue 1
H. Almeida, J. M. M. Sousa, Mário Costa
NEAR FIELD VISUALIZATION OF DIESEL SPRAY FOR DIFFERENT NOZZLE INCLINATION ANGLES IN NON-VAPORIZING CONDITIONS
Atomization and Sprays, Vol.27, 2017, issue 3
Alberto Viera, Raul Payri, Pedro Marti-Aldaravi, Gabriela Bracho
SPRAY VISUALIZATION AND HYDRAULIC CHARACTERIZATION OF THE HOLES OF A FIVE-HOLE, VALVE-COVERED-ORIFICE NOZZLE OF AN ELECTRONICALLY CONTROLLED DIESEL INJECTOR
Atomization and Sprays, Vol.6, 1996, issue 3
D. Laforgia, V. Damiani, R. Campanella