International Journal of Energy for a Clean Environment
Publicado 8 números por año
ISSN Imprimir: 2150-3621
ISSN En Línea: 2150-363X
SJR:
0.597
SNIP:
1.456
CiteScore™::
3.7
H-Index:
18
Indexed in
ENVIRONMENTAL EVALUATION OF SEWAGE SLUDGE CO-COMBUSTION IN A PILOT FLUIDIZED BED COMBUSTOR
Volumen 7,
Edición 3, 2006,
pp. 269-284
DOI: 10.1615/InterJEnerCleanEnv.v7.i3.60
SINOPSIS
Co-combustion of coal with sludge did not result in greater NOx, SO2, HCl, and CO emissions. Sludge raised heavy metals emitted, especially Cd, Pb, and Hg, mostly associated with particles greater than 1 μm. Metals were retained in bed ashes and in the cyclones and most of the Hg was adsorbed in fly ashes. The leachability of metals and organic matter decreased with combustion. Results of acid neutralization capacity showed that ashes became more resistant to acidification than the parent sludge. Globally, this study shows that combustion of sludge can reduce environmental impact compared with the traditional direct use of sludge in soils.
404 Vistas de artículos
34 Descargas de artículos
Métrica
Artículos con contenido similar:
Último edicion
Próximos Artículos
APPLICATION OF MICROBIAL FUEL CELL FOR CASSAVA FERMENTATION WASTEWATER TREATMENT
Experimental and regression analysis of C. I engine powered by diesel surrogate fuel from waste lubricating oil using microwave pyrolysis
PREFACE
Thermal analysis and Improvement of Municipal Solid Waste Syngas Combustion applied on Micro Gas Turbine
Numerical simulation of turbulent flow in a heat exchanger equipped with fins of different materials and geometries
Low-Cost Photovoltaic Emulator With a High-Dynamic Response for Small Satellite Applications
Collection efficiency analysis and structure optimization of fugitive fumes from aluminum electrolysis based on multi-field coupling
Transient Analysis of Liquid Hydrogen Transfer in Cryogenic Storage Tanks
Pure Ammonia Combustion in a Bidirectional Swirling Flow
CFD modeling of the combustion of Ukrainian coal and biomass in a flare boiler unit TPP-210a
An Experimental Study of the Cooling Efficiency on Curved Surfaces with Different Shaped Holes
Employing Granulated Bimetallic Nanocomposite of Ni/Cu@CuMOF Nanocomposite in Steam Reforming of Methanol Process for Hydrogen Production
INVESTIGATION THE PERFORMANCE OF AN EVACUATED TUBE SOLAR COLLECTOR FILLED WITH AL2O3/WATER NANOFLUID UNDER THE CLIMATE CONDITIONS OF AL-HILLA(IRAQ)
The effect of carbonization temperature on the properties of carbonaceous material obtained from ethylene-propylene-diene-monomer (EPDM) wastes
THE SOCIAL COST OF CARBON EVALUATION BASED ON CARBON CAPTURE AND STORAGE TECHNOLOGIES FOR POWER GENERATION PLANTS