Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Imprimir: 2152-5102
ISSN En Línea: 2152-5110

Volumes:
Volumen 47, 2020 Volumen 46, 2019 Volumen 45, 2018 Volumen 44, 2017 Volumen 43, 2016 Volumen 42, 2015 Volumen 41, 2014 Volumen 40, 2013 Volumen 39, 2012 Volumen 38, 2011 Volumen 37, 2010 Volumen 36, 2009 Volumen 35, 2008 Volumen 34, 2007 Volumen 33, 2006 Volumen 32, 2005 Volumen 31, 2004 Volumen 30, 2003 Volumen 29, 2002 Volumen 28, 2001 Volumen 27, 2000 Volumen 26, 1999 Volumen 25, 1998 Volumen 24, 1997 Volumen 23, 1996 Volumen 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v42.i1.60
pages 82-94

Experimental Study Resistances of Asymmetrical Pentamaran Model with Separation and Staggered Hull Variation of Inner Side-Hulls

Yanuar
Department of Mechanical Engineering, University of Indonesia Jakarta, Indonesia
Gunawan
Department of Mechanical Engineering, University of Indonesia, Jakarta 16424, Indonesia
Kurniawan T. Waskito
Department of Mechanical Engineering, University of Indonesia Jakarta, Indonesia
A. Jamaluddin
Indonesian Hydrodynamic Laboratory Surabaya, Indonesia

SINOPSIS

Application of multi-hull ships as marine transportation began to grow rapidly at the present. Advantages of pentamaran due to lower draught with the same displacement of monohull. This study aimed to determine the effect of variations in separation and staggered of inboard side hulls to the total resistances to get the configuration with the lowest resistance interference. Configuration varied by adjusting the separation and staggered of inner side hulls. Method of towing carriage experiments are used with variations of Froude number from 0.1 to 0.7. The highest drag reduction of Fr = 0.35 is II.a configuration (S/L = 3/16, R/L = 1/20) with a maximum percentage of 25%. The influence of the configuration to the resistances depends on the value of Fr, the influence of hull separation indicates the closer hull with the other gives a high interference resistance, while the influence of staggered hull indicates the position of inboard side hulls in optimal separation will give the lowest resistance in mid staggered positions.


Articles with similar content:

EFFECT OF THE HORIZONTAL CANARD OF THE SHARP-EDGED FOREBODY OF THE MANEUVERABLE AIRCRAFT MODEL ON THE VORTEX FLOW STRUCTURE
TsAGI Science Journal, Vol.50, 2019, issue 1
Konstantin Anatolievich Osipov
Unsteady Flow in the Volute of a Centrifugal Pump with Large Blade Exit Angle
International Journal of Fluid Mechanics Research, Vol.35, 2008, issue 3
Wen-Guang Li
Optimization of Spinal Implant Screw for Lower Vertebra through Finite Element Studies
Journal of Long-Term Effects of Medical Implants, Vol.24, 2014, issue 2-3
Santanu Majumder, Jayanta Kumar Biswas, Santanu Kr. Karmakar, Partha Sarathi Banerjee, Amit Roychowdhury, Subrata Saha
DISCRETE-HOLE FILM COOLING CHARACTERISTICS OVER CONCAVE AND CONVEX SURFACES
International Heat Transfer Conference 8, Vol.3, 1986, issue
Bin Xia, Shao-Yen Ko, Fu-Kang Tsou, Yong-Qing Yao
Transition of a Separated Boundary Layer past a Semi-circular Leading-edge Aerofoil Model for Varying Angles of Attack: An Experimental Investigation
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
K. Anand, K. Kannan, V. Vekataraman