Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.5

ISSN Imprimir: 2152-5102
ISSN En Línea: 2152-5110

Volumes:
Volumen 47, 2020 Volumen 46, 2019 Volumen 45, 2018 Volumen 44, 2017 Volumen 43, 2016 Volumen 42, 2015 Volumen 41, 2014 Volumen 40, 2013 Volumen 39, 2012 Volumen 38, 2011 Volumen 37, 2010 Volumen 36, 2009 Volumen 35, 2008 Volumen 34, 2007 Volumen 33, 2006 Volumen 32, 2005 Volumen 31, 2004 Volumen 30, 2003 Volumen 29, 2002 Volumen 28, 2001 Volumen 27, 2000 Volumen 26, 1999 Volumen 25, 1998 Volumen 24, 1997 Volumen 23, 1996 Volumen 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i1-3.210
pages 210-219

Experimental Study on the Droplets Distributions and Formation of Liquid Film after Impingement on the Heated Plate with and without Triangular Grooves

H. Y. Kim
Korea Research Institute of Chemical Technology, Taejon, Korea
S. S. Park
Department of Mechanical Engineering, College of Engineering, Korea University, 1, Anam-dong, Sungbuk-ku, Seoul 136-701, Korea
K. M. Cho
Hyundai Motor Company Sanl-1, Mabook-Ri, Kusung-Myun, Yongin-Shi, Kyunggi-Do, 449-910, Korea

SINOPSIS

Impingement of liquid fuel spray on the surface of intake manifold influences on the performance and emission of IC engine. In order to provide the characteristics of liquid fuel droplets after impingement on the surface including the droplet size and liquid film formation on the surface, experimental study was carried out for the droplets impinging on the vertical heated plates with and without triangular grooves. Water and heptane are chosen as the fuel. Attack angle, temperature of plate and groove angle on the selected as the major parameters, and the effects of these major parameters on the spray characteristics of rebounced droplets are examined.
It is found that the attack angle, temperature of plate and the groove angle affect on the distribution of SMD, volume concentration of droplets after impingement as well as the formation of liquid film on the plate.