Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal of Fluid Mechanics Research
ESCI SJR: 0.22 SNIP: 0.446 CiteScore™: 0.5

ISSN Imprimir: 2152-5102
ISSN En Línea: 2152-5110

Volumes:
Volumen 46, 2019 Volumen 45, 2018 Volumen 44, 2017 Volumen 43, 2016 Volumen 42, 2015 Volumen 41, 2014 Volumen 40, 2013 Volumen 39, 2012 Volumen 38, 2011 Volumen 37, 2010 Volumen 36, 2009 Volumen 35, 2008 Volumen 34, 2007 Volumen 33, 2006 Volumen 32, 2005 Volumen 31, 2004 Volumen 30, 2003 Volumen 29, 2002 Volumen 28, 2001 Volumen 27, 2000 Volumen 26, 1999 Volumen 25, 1998 Volumen 24, 1997 Volumen 23, 1996 Volumen 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v25.i1-3.90
pages 98-110

Intermittent Airblast Atomization and Spray Particle Mixing in Pulsating air Flow

T. Inamura
Department of Aeronautics and Space Engineering, Tohoku University, Sendai, Japan
Nobuki Nagai
Department of Aeronautics and Space Engineering, Tohoku University, Aramaki Aza Aoba, Aoba-ku, Sendai, Japan
K. Inokuchi
Department of Aeronautics and Space Engineering, Tohoku University, Sendai, Japan
Yo. T. Oh
Department of Mechanical Engineering, Chon Buk National University, Chonju, Korea

SINOPSIS

A new twin-fluid injector applicable to single-point injector for gasoline engine was developed. Transient spray characteristics, mixing mechanism of spray particles and the deposition mechanism on the inner wall of the intake manifold were investigated.
Spray formation by the newly developed single-point injector and the measurements of spray particle sizes, velocities and deposition rates have been conducted in a pulsating air flow. Experiments have been carried out under cold flow condition.
The particle deposition takes place due to particle inertia at high air flow rate. At low air flow rate it takes place clue to the recirculation which appears on the inner wall at the entrance of an intake manifold. On the other hand, the deposition rate of spray particles is strongly influenced by air pulsation. The behavior of spray particle is influenced by the air pulsation at the low velocity of atomizing air and at high velocity of the air flowing around the injector. The small particles follow the air flow more easily than large particles, and this causes the spatial particle size distribution in the spray clump. As the spray particle approaches to the tip of spray clump, the particle size decreases.


Articles with similar content:

EXPERIMENTAL INVESTIGATION OF DROPLET COALESCENCE IN A FULL-CONE SPRAY FROM A TWO-FLUID NOZZLE USING LASER DIFFRACTION MEASUREMENTS
Atomization and Sprays, Vol.14, 2004, issue 4
M. Valencia-Bejarano, T. A. G. Langrish
CHARACTERISTICS OF TRANSIENT, SWIRL-GENERATED, HOLLOW-CONE SPRAYS
Atomization and Sprays, Vol.16, 2006, issue 5
Julian T. Kashdan, John S. Shrimpton
DROPLET SIZE AND VELOCITY MEASUREMENTS AT THE OUTLET OF A HOLLOW CONE SPRAY NOZZLE
Atomization and Sprays, Vol.21, 2011, issue 11
Olivier Simonin, Jean-Marie Buchlin, Jeanne Malet, Francois Feuillebois, Maria Rosaria Vetrano, Stephane Mimouni, Arnaud Foissac
COMPUTERIZED VIDEO IMAGE PROCESSING TECHNIQUE FOR DROPLET COMBUSTION STUDIES
International Journal of Energetic Materials and Chemical Propulsion, Vol.3, 1994, issue 1-6
Ilan Hadar, Alon Gany
AN EXAMINATION OF SPRAYING PERFORMANCE OF Y-JET TWIN-FLUID ATOMIZERS - EFFECT OF MIXING PORT LENGTH
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Soo Yong Lee, Si Hong Song