RT Journal Article
ID 27b4814b5316c07b
A1 Habib, Mohamed A.
A1 Ben-Mansour, Rached
A1 Ahmed, Wael
A1 Al-Otaibi, Abdullah M.
A1 Al-Sarkhi, Abdelsalam
A1 Gasem, Zuhair
T1 Oil-Water Two-Phase Flow Redistribution in Horizontal and Near Horizontal Pipelines
JF International Journal of Fluid Mechanics Research
JO FMR
YR 2013
FD 2013-12-24
VO 40
IS 6
SP 494
OP 511
AB This paper presents a study to numerically investigate the effect of the operational and design parameters on the oil-water two-phase flow re-distribution in horizontal and near horizontal pipeline and their effect on pipe internal corrosion. The present simulations were carried out for pipe diameters of 100 mm, 154 mm, and 202 mm and for Reynolds numbers range from 6.37×103 to 1.59×105. The
typical oil production conditions in Saudi Arabian Oil Company (Saudi Aramco) are used in the present study. These conditions cover a mixture of Arabian oil,
whose density and viscosity range from 830 kg/m3 to 998.2 kg/m3 and from 2 cP to 30 cP respectively, with water cuts of 20, 30 and 50 %. Effect of pipe inclinations of 15° up and 15° down are also investigated. The numerical results
showed good agreement with available experiments and models at different inlet mixture velocities and water cuts. The results emphasize the strong effect of inlet
mixture velocity, oil physical properties, and pipe inclination on the water holdup and the flow patterns and consequently on the corrosion rate.
PB Begell House
LK https://www.dl.begellhouse.com/journals/71cb29ca5b40f8f8,1c7d6ade7bbd06cb,27b4814b5316c07b.html