Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Telecommunications and Radio Engineering
SJR: 0.202 SNIP: 0.2 CiteScore™: 0.23

ISSN Imprimer: 0040-2508
ISSN En ligne: 1943-6009

Volumes:
Volume 78, 2019 Volume 77, 2018 Volume 76, 2017 Volume 75, 2016 Volume 74, 2015 Volume 73, 2014 Volume 72, 2013 Volume 71, 2012 Volume 70, 2011 Volume 69, 2010 Volume 68, 2009 Volume 67, 2008 Volume 66, 2007 Volume 65, 2006 Volume 64, 2005 Volume 63, 2005 Volume 62, 2004 Volume 61, 2004 Volume 60, 2003 Volume 59, 2003 Volume 58, 2002 Volume 57, 2002 Volume 56, 2001 Volume 55, 2001 Volume 54, 2000 Volume 53, 1999 Volume 52, 1998 Volume 51, 1997

Telecommunications and Radio Engineering

DOI: 10.1615/TelecomRadEng.v73.i13.50
pages 1191-1200

AN OPTICAL BAND FREQUENCY DETECTOR BASED ON ISOTROPIC STRUCTURES

K. A. Vytovtov
Oles Gonchar Dnepropetrovsk National University

RÉSUMÉ

It is well known that communication systems with frequency modulation are characterized by a better noise immunity as compared with the widespread amplitude modulation-based ones. However, despite their wide application in the radio frequency range, there are no optical band systems of the kind at all. One of the reasons is the lack of frequency detectors for the mentioned frequency range. This paper is the first to suggest frequency detectors for the near-infrared band (850 nm) built around layered isotropic structures. The operation principle is described and basic performance characteristics of the devices are calculated. The detection in the given devices is performed in two stages. At the first one frequency changes are converted into respective amplitude variations, while at the second the obtained amplitude-modulated oscillations are demodulated using the conventional amplitude detectors. Three possible kinds of the detectors are considered, specifically, in-phase, inverse and balanced ones. The advantages and shortcomings of the devices are analyzed and perspectives of their application in the communication systems are discussed. The obtained results can be used for designing optical communication systems with frequency modulation.


Articles with similar content:

REFLECTION RESONANCES IN A RECTANGULAR WAVEGUIDE SECTION WITH TWO OPPOSITELY ORIENTED RECTANGULAR POSTS
Telecommunications and Radio Engineering, Vol.75, 2016, issue 7
A. A. Kirilenko, L. P. Mospan, S. A. Prikolotin
PROPERTIES OF THE TUNABLE WAVEGUIDE-DIELECTRIC RESONATOR WITH THE INCREASED Q-FACTOR AT THE MILLIMETER-WAVE BAND
Telecommunications and Radio Engineering, Vol.74, 2015, issue 16
I. G. Skuratovskiy, S. P. Martynyuk, A. P. Motornenko, R. I. Bilous
Formation of a Beam with a Uniform Intensity Distribution of Radiation in a Waveguide Quasi-Optical Resonator with an Amplitude-Stepped Mirror
Telecommunications and Radio Engineering, Vol.59, 2003, issue 7-9
V. A. Svich, Ye.V. Fursova, A. N. Topkov, V. A. Maslov, O. V. Gurin
METHODS FOR OBTAINING MULTIFREQUENCY LASING IN RESONANT CAVITY OF THE THZ LASER
Telecommunications and Radio Engineering, Vol.75, 2016, issue 4
V. K. Kiseliov, V. P. Radionov, P. K. Nesterov
CONSTRUCTION OF MICROWAVE RADIOMETERS BASED ON SATELLITE LOW NOISE CONVERTERS
Telecommunications and Radio Engineering, Vol.76, 2017, issue 4
I. M. Mytsenko, D. D. Khalameyda