Publication de 6 numéros par an
ISSN Imprimer: 2150-766X
ISSN En ligne: 2150-7678
Indexed in
ATOMIZATION OF GEL FUELS USING IMPINGING-JET ATOMIZERS
RÉSUMÉ
The performance of impinging-jet atomizers for gelled fluids was examined. An injection system based on prefixing the mass flow rate of the atomized fluid was designed and built. Plain and gelled water were used as working fluids. Three types of impinging jet atomizers (doublet, triplet, and quadruplet) at two impinging angles were utilized. The results indicate a tendency of the droplet size to decrease with the mass flow rate growth. Gels were more difficult to atomize than Newtonian fluids. The triplet atomizer was found to be superior to the doublet and quadruplet atomizers. The lowest Sauter mean diameter values obtained were 8 μm for water and 10 μm for gel with the triplet injector.
-
Lee Jong Guen, Fakhri Syed, Yetter Richard, Atomization and Spray Characteristics of Gelled-Propellant Simulants Formed by Two Impinging Jets, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2009. Crossref
-
Connell Terrence L., Risha Grant A., Yetter Richard A., Natan Benveniste, Multi-Injector Impinging Jet Studies of Ignition Delay for Hydrogen Peroxide and Gelled Hydrocarbon Fuel Containing Reactive or Catalytic Particles, 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015. Crossref
-
Connell Terrence L., Risha Grant A., Yetter Richard A., Natan Benveniste, Hypergolic Ignition of Hydrogen Peroxide/Gel Fuel Impinging Jets, Journal of Propulsion and Power, 34, 1, 2018. Crossref
-
Pan Lun, E Xiu‐Tian‐Feng, Cao Jinwen, Xue Kang, Design and Synthesis of Nanofluid Fuels, in High‐Energy‐Density Fuels for Advanced Propulsion, 2020. Crossref
-
Xue Kang, Cao Jinwen, Pan Lun, Zhang Xiangwen, Zou Ji-Jun, Review on design, preparation and performance characterization of gelled fuels for advanced propulsion, Frontiers of Chemical Science and Engineering, 16, 6, 2022. Crossref