Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Composites: Mechanics, Computations, Applications: An International Journal
ESCI SJR: 0.193 SNIP: 0.497 CiteScore™: 0.39

ISSN Imprimer: 2152-2057
ISSN En ligne: 2152-2073

Composites: Mechanics, Computations, Applications: An International Journal

DOI: 10.1615/CompMechComputApplIntJ.v3.i4.10
pages 283-305

THE INFLUENCE OF LUDERS FRONT PROPAGATION ON THE STRENGTH OF THE "COATING-SUBSTRATE" COMPOSITE. NUMERICAL SIMULATION

Ruslan R. Balokhonov
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, Tomsk, Russian Federation
V. A. Romanova
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, Tomsk
Siegfried Schmauder
Materials Testing Institute (IMWF), University of Stuttgart, Stuttgart 70569, Germany
E. A. Schwab
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, Tomsk, Russian Federation
S. A. Martynov
Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 634021 Tomsk, Russian Federation

RÉSUMÉ

Processes of propagation of localized plastic deformation fronts in a material with boride coating have been investigated. The boundary-value dynamic problem is solved in the plane-strain formulation. Numerical simulation is performed by the finite-difference method. In calculations the microstructure of the composite is taken into account explicitly and corresponds to that observed experimentally. The constitutive equations for the steel substrate include an elastoplastic model with isotropic strain hardening taking into account a relation to describe slow flows. Deformation and fracture of the coated material under external compression is shown to be controlled by the appearance of local regions of tension along the interface. An interaction and interplay between nonhomogeneous plastic deformation in the steel substrate and crack origination and growth in the coating are studied. Cracking patterns, location of the fracture onset, and volume fraction of failed material are found to depend on the velocity of Luders front propagation.


Articles with similar content:

IMPACT TOUGHNESS OF NANOCOMPOSITE MATERIALS FILLED WITH FULLERENE C60 PARTICLES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.9, 2018, issue 2
M. Yu. Amelin, S. V. Panin, А. А. Sapronov, A. V. Buketov, N. N. Buketova, Mykola V. Brailo, P. О. Marushak
Modeling of Mechanical Behavior of Geomaterials on the Mesoscale
International Journal for Multiscale Computational Engineering, Vol.3, 2005, issue 2
Igor Yu. Smolin, Pavel V. Makarov, Oleg I. Cherepanov, Yurii P. Stefanov
CALCULATION OF THE INTERGRANULAR ENERGY IN TWO-LEVEL PHYSICAL MODELS FOR DESCRIBING THERMOMECHANICAL PROCESSING OF POLYCRYSTALS WITH ACCOUNT FOR DISCONTINUOUS DYNAMIC RECRYSTALLIZATION
Nanoscience and Technology: An International Journal, Vol.7, 2016, issue 2
Peter V. Trusov, Nikita S. Kondratev
INFLUENCE OF GRAINS ORIENTATION ON THE MIGRATION VELOCITY OF HIGH-ANGLE BOUNDARIES
Nanoscience and Technology: An International Journal, Vol.8, 2017, issue 3
Peter V. Trusov, V. G. Bazhenov, Nikita S. Kondratev
CLOSED TWO-WAY SHAPE MEMORY EFFECT IN UNIDIRECTIONAL COMPOSITE WITH SHAPE MEMORY ALLOY FIBERS AND ELASTIC MATRIX
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 2
Andrey A. Movchan, M. I. Chernov